-
Reverse flow water pump Housing assy
by
GEE-BEE
on 15 Jul, 2014 07:15
-
-
#1
by
GEE-BEE
on 15 Jul, 2014 10:39
-
-
#2
by
Diesel_Zuk
on 15 Jul, 2014 11:56
-
What is the point of it exactly? I have never heard of it before.
-
#3
by
ORCoaster
on 15 Jul, 2014 12:43
-
How's that work? Push Hot water into the bottom of the radiator instead of pull cold out? Maybe made to back flush the heater core?
Explain this one for us as we really do want to know. Purpose is?
-
#4
by
RabbitJockey
on 15 Jul, 2014 12:51
-
coolant flow is the same, the water pump just spins in the opposite direct.
-
#5
by
GEE-BEE
on 15 Jul, 2014 13:40
-
-
#6
by
ORCoaster
on 15 Jul, 2014 16:48
-
Ahhh ha moment
-
#7
by
libbydiesel
on 15 Jul, 2014 17:29
-
I'll reiterate what I mentioned in the other thread. I would personally rather have the water pump on the single v-belt and all the other accessories separate rather than have the water pump with all the other accessories. The water pump is the only essential belt driven item. Making its operation rely on the proper function of the serp belt, tensioner, A/C compressor and Alt means that if any of those items fail, you are dead in the water.
-
#8
by
GEE-BEE
on 15 Jul, 2014 19:54
-
With a 6pk belt, I will take my chances
Thanx Libby for your input....
Some people just have to be different....
I invented the first silicone/fiberglass aircraft valve cover gasket
The first were for just my aircraft, then the word got out....
Some models have 144 valve cover gaskets per aircrat ( B25 )and with these we have eliminated the leakage
Cheers to all here
GB
-
#9
by
sdubfid
on 15 Jul, 2014 22:18
-
do you make Volkswagen gaskets?
-
#10
by
GEE-BEE
on 15 Jul, 2014 22:44
-
Next will be exhaust gasket and the intake..
Intake silicone with fiberglass, no oil soak etc
The exhaust will be a very advanced material we use on aircraft exhaust, without the aircraft cost
Stay tuned, and dont touch that channel...
GB
-
#11
by
vanbcguy
on 16 Jul, 2014 08:12
-
How about an AHU valve cover gasket??
-
#12
by
GEE-BEE
on 16 Jul, 2014 10:29
-
It's molded
I always drill and tap thr head and install the G60 valve cover/g60 vlave cover gasket
-
#13
by
vanbcguy
on 16 Jul, 2014 16:43
-
It's molded
I always drill and tap thr head and install the G60 valve cover/g60 vlave cover gasket
That won't work with the AHU though, it has a wavy front. The AAZ works with the G60 cover but not the AHU /1Z.
-
#14
by
GEE-BEE
on 16 Jul, 2014 18:38
-