WTB - crankshaft drive pulley (V-belt) for 1.5 / 1.6D

[Jetmugg]

I'm putting my engine together from a variety of parts, and realized that I don't have a pulley that runs off the crankshaft for my 1.5/1.6 engine.  It's a 1.5 crank in a 1.6TD block.

I have the correct water pump and pulley, but don't have the crank pulley.

Any help is appreciated.

Steve.

[justiz00]

I have one but it has a balancer made on to it (TD model from 84 cy motor). I might have a standard but will have to look.

Added picture


Justice

[CRSMP5]

 .he needs a old style crank pully with real keyway.. do you have the keyway for the crank?

the only 1 i have is for a 1.6 longblock i have.. so not for sale.. but can get pic easy..

[justiz00]

Ok, good luck with locating.

[Jetmugg]

I think I found one

It's a stamped pulley that bolts to the cogged crank sprocket.  There is a "dimple" on the back of the pulley which indexes with a "bump" on the sprocket.

Steve.

[CRSMP5]

thats simple.. bbob owns it but got a non ac one right here.. ac has wider groove.. also have matching wp pully...