WTB B4 passat tdi pedals for mk2 tdi swap

[the4ork]

i have a mk3 parts car, doesnt look like i can get the pedals in without lots of mods.

going to use the 02a so i have most of the hyd clutch setup, but i need the pedal assembly so i can bolt it to my firewall and have everything plug and play including cruise

thanks

[bbob203]

make sure you get one with the cruise diaphragm on it so you can relocate the cruise diaphragm from under the hood to the pedal.

[CRSMP5]

tdi... no cable... so no vac pod for cruise...

needs to be non abs with slave bracket too... tht part hard to obtain...

[burn_your_money]

Did you guys get a b3 with TDI? Ours started with b4.

[the4ork]

i probably mean b4, dont know much about B series passats

[CRSMP5]

b3 hydro clutch... like roddo.. he needs hydro clutch.. the clutch master needs to match poedal too.. b3 different then b4... old is solid bar.. b4/mk3 is stamped into a c like shape.. hoe they affix 100% different.. he just needs b3-b4 prefeered non abs pedals and bracket for clutch master.. gotta have that bracket... you can mod the mk2 with a hole and bolt if you get that bracket...

before i install this b3 into the mk2 that i have ill get you pic...

[CRSMP5]

http://www.vwdiesel.net/forum/index.php?topic=33535.0

i made this thread for you... i am most likey going to fab a clutch master bracket... look at it.. lets talk..