« previous next »
Pages: [1]

Author Topic: Still need a one hole head gasket  (Read 2580 times)

May 28, 2013, 07:10:12 pm

Gizmoman

  • Veteran
  • Offline
  • ***
  • 1301
  • Personal Text
    AAZ 1.9, HE 200 Turbo, 82 Vanagon, AAP 5 speed
Still need a one hole head gasket
« on: May 28, 2013, 07:10:12 pm »
I received my two head gaskets from Canada via UPS today - perfect timing!



Man was I bummed when I opened the package and discovered they are three hole gaskets!
Part number Victor Reinz 61-31225-30

Back on the hunt :(
Logged
Jim W - 82 Vanagon Westy - AAZ 1.9, Mild head port, Cummins Holset HE200WE turbo, Frozen Boost WAIC, 10" Charge-pipe intake, Ball bearing IM shaft, Giles Pump, 215/70R16, AAP 5 speed Trans. 22 lbs max boost
Reply #1May 28, 2013, 07:24:33 pm

Gizmoman

  • Veteran
  • Offline
  • ***
  • 1301
  • Personal Text
    AAZ 1.9, HE 200 Turbo, 82 Vanagon, AAP 5 speed
Re: Still need a one hole head gasket
« Reply #1 on: May 28, 2013, 07:24:33 pm »
OK - all is well.
The three holes you see are not punched all the way through - only one is.

The new gasket is 2.12 mm

The one I had already installed and torqued several times (which only has one hole) measures 1.94 mm.
My guess is that the two I received will mash to the same thickness.

YAYYYYYYYYYYYYYY!

Big thanks to the very helpful dude to the North for really going the extra mile.
Logged
Jim W - 82 Vanagon Westy - AAZ 1.9, Mild head port, Cummins Holset HE200WE turbo, Frozen Boost WAIC, 10" Charge-pipe intake, Ball bearing IM shaft, Giles Pump, 215/70R16, AAP 5 speed Trans. 22 lbs max boost
Reply #2May 28, 2013, 07:33:20 pm

burn_your_money

  • Global Moderator
  • Veteran
  • Offline
  • ***
  • 8999
  • Personal Text
    Bright, On
Re: Still need a one hole head gasket
« Reply #2 on: May 28, 2013, 07:33:20 pm »
UPS or USPS?
Logged
Tyler
Reply #3May 28, 2013, 08:17:29 pm

Gizmoman

  • Veteran
  • Offline
  • ***
  • 1301
  • Personal Text
    AAZ 1.9, HE 200 Turbo, 82 Vanagon, AAP 5 speed
Re: Still need a one hole head gasket
« Reply #3 on: May 28, 2013, 08:17:29 pm »
USPS (Santa)
Logged
Jim W - 82 Vanagon Westy - AAZ 1.9, Mild head port, Cummins Holset HE200WE turbo, Frozen Boost WAIC, 10" Charge-pipe intake, Ball bearing IM shaft, Giles Pump, 215/70R16, AAP 5 speed Trans. 22 lbs max boost
Reply #4May 29, 2013, 05:20:15 am

burn_your_money

  • Global Moderator
  • Veteran
  • Offline
  • ***
  • 8999
  • Personal Text
    Bright, On
Re: Still need a one hole head gasket
« Reply #4 on: May 29, 2013, 05:20:15 am »
Quote from: Gizmoman on May 28, 2013, 08:17:29 pm
USPS (Santa)

That makes more sense. I try to avoid UPS for international stuff.

Looking forward to seeing some videos
Logged
Tyler
Reply #5May 29, 2013, 06:05:36 am

CRSMP5

  • Guest
Re: Still need a one hole head gasket
« Reply #5 on: May 29, 2013, 06:05:36 am »
hey giz... what you doing with the old one? i need 1 to play with... a used one would be great.. else i guess who i need to hit up for a new one.. but hell i do not even know if this engine idea will work.. so a cheap used one would be perfect..
Logged
Reply #6May 29, 2013, 06:12:22 am

Gizmoman

  • Veteran
  • Offline
  • ***
  • 1301
  • Personal Text
    AAZ 1.9, HE 200 Turbo, 82 Vanagon, AAP 5 speed
Re: Still need a one hole head gasket
« Reply #6 on: May 29, 2013, 06:12:22 am »
Quote from: CRSMP5 on May 29, 2013, 06:05:36 am
hey giz... what you doing with the old one? i need 1 to play with... a used one would be great.. else i guess who i need to hit up for a new one.. but hell i do not even know if this engine idea will work.. so a cheap used one would be perfect..

A pm and an address will get it to ya.
Frankly, I think its quite usable - just didn't want to chance it. BTW, I had it torqued to 125 ft/lbs per ARP spec.
Logged
Jim W - 82 Vanagon Westy - AAZ 1.9, Mild head port, Cummins Holset HE200WE turbo, Frozen Boost WAIC, 10" Charge-pipe intake, Ball bearing IM shaft, Giles Pump, 215/70R16, AAP 5 speed Trans. 22 lbs max boost
Reply #7May 30, 2013, 02:52:26 am

CRSMP5

  • Guest
Re: Still need a one hole head gasket
« Reply #7 on: May 30, 2013, 02:52:26 am »
 :D  im doing something w/11mm studs... beleive me your holding a no idea if will work/not item i need for "test fit" at min and being 1 notch makes it perfect... pm on its way..
Logged
Reply #8May 30, 2013, 05:06:18 am

theman53

  • Global Moderator
  • Veteran
  • Offline
  • ***
  • 7835
  • Personal Text
    Holmes County Ohio - North Central Ohio
Re: Still need a one hole head gasket
« Reply #8 on: May 30, 2013, 05:06:18 am »
I have the old HG from my 1.6 that was the 1 notch metal. Let me know if you need it for a template, as it was used.
Logged
Pages: [1]
« previous next »