I have a 1.6na mech head that came with my current project. Engine threw a rod so valves would need replaced. Previous owner stated head had less than 8k on it. No reason to doubt him. 150 with injectors. Plus shipping (40-50)
how are the lifter bores on the valves that got squished?
I don't have the tools to pull the valves... All the valves move freely when can is turned if that helps
I don't have the tools to pull the valves... All the valves move freely when can is turned if that helps
deep socket and a hammer.
Ill see if I can get to it today.
I will trade for a stock manifold and downpipe