Author Topic: 1.6 na mechanical head (Read 4171 times)

ThatsNotStock · « **on:** May 06, 2013, 06:28:46 am »

I have a 1.6na mech head that came with my current project. Engine threw a rod so valves would need replaced. Previous owner stated head had less than 8k on it. No reason to doubt him. 150 with injectors. Plus shipping (40-50)

ThatsNotStock · « **Reply #1 on:** May 07, 2013, 12:44:45 pm »

Bump for offers

R.O.R-2.0 · « **Reply #2 on:** May 07, 2013, 01:39:59 pm »

how are the lifter bores on the valves that got squished?

ThatsNotStock · « **Reply #3 on:** May 11, 2013, 08:01:13 am »

I don't have the tools to pull the valves... All the valves move freely when can is turned if that helps

bbob203 · « **Reply #4 on:** May 11, 2013, 08:13:42 am »

Quote from: ThatsNotStock on May 11, 2013, 08:01:13 am

I don't have the tools to pull the valves... All the valves move freely when can is turned if that helps

deep socket and a hammer.

ThatsNotStock · « **Reply #5 on:** May 11, 2013, 08:24:03 am »

Ill see if I can get to it today.

I will trade for a stock manifold and downpipe

Author Topic: 1.6 na mechanical head (Read 4171 times)

ThatsNotStock

1.6 na mechanical head

ThatsNotStock

Re: 1.6 na mechanical head

R.O.R-2.0

Re: 1.6 na mechanical head

ThatsNotStock

Re: 1.6 na mechanical head

bbob203

Re: 1.6 na mechanical head

ThatsNotStock

Re: 1.6 na mechanical head