Author Topic: I hope this isnt my i/p going south... video content (Read 4608 times)

8v-of-fury · « **Reply #1 on:** August 15, 2012, 09:15:49 am »

That is your timing belt rubbing on the side of your tensioner pulley, I can't recall.. Are they plastic or metal on the 1.6's?

Does the noise only happen at idle? or all the time?

Dakotakid · « **Reply #2 on:** August 15, 2012, 10:10:53 am »

Sounds like the bearing in the tensioner is gone.

bbob203 · « **Reply #3 on:** August 15, 2012, 11:00:03 am »

hmm. the damn thing has less than 15kmiles on it. I've had this noise for awhile I just ignored it for some reason.

410 · « **Reply #4 on:** August 15, 2012, 07:07:58 pm »

I just had a car in where the metal timing belt shield was rubbing the cam pulley. I loosened the two 10mm bolts on each side of the head that hold the shield on, pushed the shield towards the head and retightened. The bolt holes are slotted. Hopefully that's your problem too.

8v-of-fury · « **Reply #5 on:** August 15, 2012, 07:32:54 pm »

Can we get a picture of the relation of the belt to the tensioner pulley please and thank-you?

Author Topic: I hope this isnt my i/p going south... video content (Read 4608 times)

bbob203

I hope this isnt my i/p going south... video content

8v-of-fury

Re: I hope this isnt my i/p going south... video content

Dakotakid

Re: I hope this isnt my i/p going south... video content

bbob203

Re: I hope this isnt my i/p going south... video content

410

Re: I hope this isnt my i/p going south... video content

8v-of-fury

Re: I hope this isnt my i/p going south... video content