Help needed - mounting parts for the 1.6 TD injection pump

[TurboJ]

I need a picture that clearly shows how the injection pump is mounted on a 1.6D or 1.6TD.

It's been so long since my car was all in one piece, and recently I have only ever seen 1.9s (which have different pump mounts as you know).

I need the info to mount my pump correctly and also to see if my custom pump will fit the stock mounts (it's longer than a VW pump).

Any help is much appreciated!

[knikula]

Hyvaa Pyvaa...

on a markII motor...

https://www.dropbox.com/s/q1xw8t8lb0wbfn9/IMG_0779.JPG


on a mark I motor, the passenger side mount is part of the same bracket...

not like this, but all in one piece...
 https://www.dropbox.com/s/j7pvyrzlify3c3p/IMG_20120524_140329.jpg

hope this helps...

[TurboJ]

Thanks!

Anyone have pictures of the mounting parts behind that wide plate?

[8v-of-fury]

#14 it bolts to the block with two bolts, to the pump bracket/motor mount with two bolts and it is also the pumps back bracket support. The same for 1.5,1.6 and 1.9 IDI's.

[TurboJ]

Is the pump actually attached to the engine block at all, or is it only bolted to the thick bracket on the pulley side of the engine?

[8v-of-fury]

Can you see my picture? Can you read what I wrote?

The small bracket that is highlighted, #14. It attaches to the back of the pump, #24.

#14 then attaches to the block with two of #15. Two more of #15 attach bracket #14 to the pump bracket on the pulley side. of the pump, which is also the mk1 motor mount.

[TurboJ]

Hey, thank you so much!

I was in such a hurry last time round that I didn't even notice what you had written on top of the picture.... 

This should make it easier for me, even though I remember that my car did have a somewhat different mounting system.
In any case - that you!