Wanted- power steering and a/c brackets with all pulleys

[UnderPSI]

What the title says, let my know what you have. Thanks

[R.O.R-2.0]

i can get you the bracket, but nothing else. sorry if that doesnt help you, but just throwing it out there..

the a/c and non a/c crank and water pump pulleys should be the same. it should just be the bracket that makes it special. the non a/c bracket sets the alternator closer to the flywheel..

[CRSMP5]

brrackets for what year???  and wrong on pullies... ac wider for thicker belt then non ac..

[R.O.R-2.0]

brrackets for what year???  and wrong on pullies... ac wider for thicker belt then non ac..

DOH!!

your right..

the crank and water pump pulleys are DIFFERENT, like mentioned.

[UnderPSI]

I need the a/c and power steering brackets and pulleys. Crank pulley as well, it's a mechanical 1.6 1984ish....

[R.O.R-2.0]

I need the a/c and power steering brackets and pulleys. Crank pulley as well, it's a mechanical 1.6 1984ish....

power steering on a rabbit? good luck finding parts for that..

[UnderPSI]

Had all the brackets once, lost then when I moved.

[R.O.R-2.0]

only seen a handful of rabbits with power steering..

[rs899]

I have the p/s bracket, pulley and pump from a gasser JH engine that came from an '84 Scirocco.  Does that work?

[UnderPSI]

Where does that put the pump on the engine?

[fatmobile]

I was thinking the MK1 AC alternator brackets had an extra bolt hole on the bottom,
 like all the MK2s AC or not.
 They look similar to the Mk2 bracket so I might have confused them.

[rs899]

Where does that put the pump on the engine?

Well, under it.  It looks pretty much  like a MKII lashup, but I didn't compare them side by side

[UnderPSI]

That would work, will that work with a/c?

[ROBZUK]

I have the alt, crank and another pulley off my diesel swap. I can shoot a pic if you like. $25 shipped.

[UnderPSI]

Don't need the alt pulley, crank pulley for a/c?