« previous next »
Pages: [1]

Author Topic: I replaced my camshaft seal and it still leaks  (Read 5207 times)

March 28, 2012, 01:53:53 pm

srgtlord

  • Veteran
  • Offline
  • ***
  • 797
I replaced my camshaft seal and it still leaks
« on: March 28, 2012, 01:53:53 pm »
Anyways why would this happen? WHat the heck did I do wrong? I followed the instructions in the Bentley.
« Last Edit: March 28, 2012, 05:49:38 pm by 8v-of-fury »
Logged
Reply #1March 28, 2012, 03:16:17 pm

8v-of-fury

  • Guest
Re: WTF I replaced my camshaft seal and it still leaks
« Reply #1 on: March 28, 2012, 03:16:17 pm »
if the camshaft were warped, it would never seal properly again. However how many warped cam ends has anyone seen? Timing belt too tight? Its possible
Logged
Reply #2March 28, 2012, 03:59:49 pm

dieselweasel

  • Veteran
  • Offline
  • ***
  • 312
Re: WTF I replaced my camshaft seal and it still leaks
« Reply #2 on: March 28, 2012, 03:59:49 pm »
Is there a groove in the camshaft sealing surface?  Is the seal in square? 
Logged
'94 Jetta TD dusty mauve-302,xxx kms
Reply #3March 28, 2012, 04:02:05 pm

theman53

  • Global Moderator
  • Veteran
  • Offline
  • ***
  • 7835
  • Personal Text
    Holmes County Ohio - North Central Ohio
Re: WTF I replaced my camshaft seal and it still leaks
« Reply #3 on: March 28, 2012, 04:02:05 pm »
Is it leaking around the camshaft or around the cap?
Logged
Reply #4March 28, 2012, 04:23:37 pm

srgtlord

  • Veteran
  • Offline
  • ***
  • 797
Re: WTF I replaced my camshaft seal and it still leaks
« Reply #4 on: March 28, 2012, 04:23:37 pm »
Im not sure where exactly. It looks wet around the edge of the seal. Maybe it got distorted when I pushed it in. Ill know this weekend after I pull the belt for the 3rd time. Any advice for RTV sealers? lol
Logged
Reply #5March 28, 2012, 04:45:33 pm

rabbitman

  • Veteran
  • Offline
  • ***
  • 2788
Re: WTF I replaced my camshaft seal and it still leaks
« Reply #5 on: March 28, 2012, 04:45:33 pm »
I would almost bet it's really the vc gasket leaking.
Logged
'82 Rabbit, I put on a euro vnt-15, 2.25" DP, 2.5" exhaust, the result.....it whistled.

I removed the turbo, made a toilet bowl 2.5" DP, the result....it was deafening. Now it has a homemade muffler up front and a thrush in the rear, the result.....less loud.
Watch: AGENDA, GRINDING AMERICA DOWN
Reply #6March 28, 2012, 04:49:55 pm

srgtlord

  • Veteran
  • Offline
  • ***
  • 797
Re: WTF I replaced my camshaft seal and it still leaks
« Reply #6 on: March 28, 2012, 04:49:55 pm »
Thats a possibility , but I upgraded to the rubber gasket....
Logged
Reply #7March 28, 2012, 04:55:22 pm

rabbitman

  • Veteran
  • Offline
  • ***
  • 2788
Re: WTF I replaced my camshaft seal and it still leaks
« Reply #7 on: March 28, 2012, 04:55:22 pm »
Quote from: srgtlord on March 28, 2012, 04:49:55 pm
Thats a possibility , but I upgraded to the rubber gasket....

I did too and still have leaks. I think the whole problem is the garbage warpable stamped steel valve covers. It would be nice if the cast aluminum ones were cheaper and easier to find.
Logged
'82 Rabbit, I put on a euro vnt-15, 2.25" DP, 2.5" exhaust, the result.....it whistled.

I removed the turbo, made a toilet bowl 2.5" DP, the result....it was deafening. Now it has a homemade muffler up front and a thrush in the rear, the result.....less loud.
Watch: AGENDA, GRINDING AMERICA DOWN
Reply #8March 28, 2012, 05:48:16 pm

srgtlord

  • Veteran
  • Offline
  • ***
  • 797
Re: WTF I replaced my camshaft seal and it still leaks
« Reply #8 on: March 28, 2012, 05:48:16 pm »
How would I rule out the valve cover leaking? RTV? Non-Hardening Gasket sealer? Another valve cover?
Logged
Reply #9March 28, 2012, 10:39:24 pm

fatmobile

  • Veteran
  • Offline
  • ***
  • 2922
    • http://www.geocities.com/vwfatmobile/
Re: I replaced my camshaft seal and it still leaks
« Reply #9 on: March 28, 2012, 10:39:24 pm »
It's like the cam starts to taper before the seal has room to seal.
 I'm not sure the outer dust seal even touches the cam.

 Did you grease the seal lips?
Logged
Tornado red, '91 Golf 4 door, with M-TDI 12mm pump, south bend clutch, VNT-15 turbo, 02A trany
MK4s: 2000 TDI jetta, 2003 TDI wagon, 2000 golf 2.0 gasser.
'84 Rabbit with 1.7TD KY block pistons bored to 80mm, VNT-15
'84 GTI with stock 1.6TD starion intercooler.
Reply #10March 29, 2012, 12:50:13 am

745 turbogreasel

  • Guest
Re: I replaced my camshaft seal and it still leaks
« Reply #10 on: March 29, 2012, 12:50:13 am »
The Bentley might have forgot to mention taking a ball pein and a wood block, and undimpling all the bolt holes in the VC.
Logged
Pages: [1]
« previous next »