WTB AAZ Head, set of 2-spring valve spring set w/ seats - Parts for Sale/Wanted - VWDiesel.net The IDI, TDI, and mTDI source.

• WTB AAZ Head, set of 2-spring valve spring set w/ seats by CrazyAndy on 07 Mar, 2012 18:40
• Hello everybody!
  
  Let's get the obvious out of the way; looking for an AAZ head for my project.  The only baisic conditions is it must be:
  1.Sraight sealing surface
  2.Good original precups installed
  3.Good valve seats
  4.All cam caps w/ VC studs installed
  
  I can buy my own valves, guides, vavle spring tops and retainers.  I baisically want a complete serviceable head core to port and maybe rebuild as I see fit.
  
  The next thing I'd like to have (but not necessarily need) i sa set of dual valve springs complete with seats.  I already have a set of good single springs, so this is kind of a good-to-have.  Gonna be running a bit of boost and just looking or a bit of peace of mind.
  
  Thanks for the interest! 
  
  P.S.:  Where can you buy good AAZ cams?
• #1 by 8v-of-fury on 07 Mar, 2012 19:21
• fwiw. 1.6 cams will work in the aaz head. Contact Smokey Eddy
• #2 by rallydiesel on 07 Mar, 2012 20:38
• I've got one $250 plus shipping. Has 8mm valves with single springs unfortunately. Comes complete with cam, valve cover, etc. Everything except gaskets and the oil gallery plug on the side. I can send you some macro pics of the pre-cups etc. Head looks to be in good shape although I never ran it as I sold my IDI.
• #3 by CRSMP5 on 07 Mar, 2012 21:52
• hey i got you covered on the springs if ya want... have a bent valve 16v head here.. same as i used on my tdi.. if you want some springs let me know..
• #4 by CrazyAndy on 08 Mar, 2012 12:56
• Quote from: CRSMP5 on 07 Mar, 2012 21:52

  hey i got you covered on the springs if ya want... have a bent valve 16v head here.. same as i used on my tdi.. if you want some springs let me know..
  

  
  Oh yeah I forgot the 16v springs and seats work in 8v heads!  I guess I'll just get those along with the trans setup when we do our late march part pick-up trip.  How much?
  
  And RalleyDiesel, I'll PM you an email address for those pics.  Do you think you could sell the head as a bare unit?  I'd take it without cam and lifters at least.
  
  I'll message Eddie later, but would I just ast for a 1.6 cam?  I don't exactly get what I'm contacting him about concerning cam selection or whatever.
• #5 by CRSMP5 on 08 Mar, 2012 19:02
• not just a 1.6 cam.. a HYDRO cam.. and im just going to hook ya up with the valve springs...
• #6 by rallydiesel on 09 Mar, 2012 09:43
• My FS thread is here: http://www.vwdiesel.net/forum/index.php?topic=30081.0
• #7 by rallydiesel on 11 Mar, 2012 09:36
• Sold mine.
• #8 by CrazyAndy on 11 Mar, 2012 22:24
• Bump for still needing.
  
  (And if it's bad form to bump in the GTD boards I won't do it again.)
• #9 by CrazyAndy on 20 Mar, 2012 21:03
• Anyone still out there that can hook me up w/ an AAZ head?  Anyone?
• #10 by starrd on 22 Mar, 2012 19:00
• There is a brand new one here:
  
  http://shopping.boraparts.com/product_info.php?cPath=21_27_83_128&products_id=32
  
  I have one of the Bora Parts earlier Kobenschmidt versions made in Mexico it is of good quality.