-
new intake
by
mtrans
on 23 Feb, 2011 14:14
-
Hi
Everybody make new intake,so long winter- me too.Original have 1 met "U"shape rubber, so I cut some, turn 90 deg and made two intake.Perhaps it`s became turbo after 19 yr.Your opinion.Best.
-
#1
by
mtrans
on 25 Feb, 2011 13:02
-
Nobody,camon gays my double intake critics,new one should get KN,perhaps same bloking till half trotile.Best
-
#2
by
theman53
on 25 Feb, 2011 13:08
-
how does it work?
-
#3
by
rallydiesel
on 25 Feb, 2011 13:30
-
-
#4
by
8v-of-fury
on 25 Feb, 2011 14:55
-
looks like a toilet/plumbing setup.. whats going on in this picture exactly..
-
#5
by
Dakotakid
on 25 Feb, 2011 19:25
-
I used to have one of these once.
I used to watch the lady next door through it......
-
#6
by
mtrans
on 26 Feb, 2011 14:01
-
I can assure you that isn`t for to watch the lady next door through,well not yet,on the left is tin tube 250 mm long(insted of 1 met rubber before) OD 70 mm and that is new intake for my 2500 NA,on the right is original intake that will became SECOND intake with new KN air filter,black plastik is original air filter box.
This is from donor car,so I want to try is there any improvement as I fill I need same air more on upper rpm.So I have 2 intake join in one,and I am intersting that anybody try samething like?do I need same control on second one.Best
-
#7
by
rabbitman
on 26 Feb, 2011 15:38
-
I think more picures will help us.
-
#8
by
rallydiesel
on 26 Feb, 2011 15:46
-
I assume this is supposed to function as a variable length intake runner. There's a couple problems with this design. 1) The split occurs upstream of the manifold- it should be between the intake port and the manifold itself. 2) there's no valve to close one of the pipes at low rpm.
-
#9
by
mtrans
on 27 Feb, 2011 06:58
-
Thanks on replys.
Picture of corse,I see it`s better than digital.
Rally,connection between 2 pipes at air box is almost perfect "Y" so air flow can be good?
for control valve as you see it can be adjustable connected to IP or/and even manually,because it can be different
demand, mostly for black smoke,(pherhaps some insane thing with optical sensor aka automatic).Best
-
#10
by
GEE-BEE
on 27 Feb, 2011 09:55
-
Send to me with all your correct I.D.'s marked and I will make it from a one piece silicone
There will be a tool charge
GB
-
#11
by
mtrans
on 28 Feb, 2011 13:09
-
Thanks GB on offer,but shipping to Europa? Pipes don`t worry me as you see,only how much control I need.
By the way,I look how man make tube to make ordinary rubber,which material do you use for silicon ones and temperature.
-
#12
by
GEE-BEE
on 01 Mar, 2011 18:28
-
It's a 5 ply lat up with fiberglass, using a manderell
oven for 15 min's
pull it off and holds it shape, trim to spec with a band saw
I would show you, but then you would have put you in a mine shaft in the desert...
I worked at a large mfg to learn the process, I than started my own shop twenty years ago
GB
