-
has any 1 tryed?
by
guy plain
on 30 Aug, 2011 23:29
-
-
#1
by
the caveman
on 31 Aug, 2011 05:05
-
also known as Prothe and hansdieselparts and one or two other names?.Some parts are questionable, as mostly made in China, however some people have had success with some of his parts. Always worrisome when someone uses more than one name for the same company.
Do a search here for what others have said.
-
#2
by
guy plain
on 31 Aug, 2011 09:52
-
Do a search here for what others have said
i did do a search . but did,nt find anything under the name Westportparts. now...prothe....i have come across that name alot on this site...lol not always mentioned in a good way....the way i see them is there parts are a good temp till you can get german ones ...lol
theyer EGT gauge temps me tho....those seem to be high priced around here....
-
#3
by
guy plain
on 31 Aug, 2011 10:33
-
dose anyone know of a list of parts that are good from prothe? what should a person watch out for? i think that a list might be usefull..for every one ..... thanks for any input.
-
#4
by
rallydiesel
on 31 Aug, 2011 11:27
-
I have heard the bare cylinderheads are ok. Also the pistons (not rings). I have personally used the idi injector tips without problems.
-
#5
by
ORCoaster
on 31 Aug, 2011 11:48
-
I used the Miata site and when the head for the injection pump wouldn't develop pressure I was able to return it. Granted it did cost me shipping to do that but the man did stand by his product and replaced it for me. If I had known then what I know now about rebuilding an IP I wouldn't have damaged the pump and head in the first place. Oh well, live and learn.
-
#6
by
R.O.R-2.0
on 31 Aug, 2011 12:22
-
dose anyone know of a list of parts that are good from prothe? what should a person watch out for? i think that a list might be usefull..for every one ..... thanks for any input.
that statement, for the most part, is an oxymoron..
but on the other hand, there are a COUPLE good parts from him.. like was stated the pistons (not the rings that come with them) are of decent quality, and so are the head castings..
the whole rebuild injection pumps are GARBAGE.. ive only heard of one actually running, and it didnt run for long, i can tell you that..
most of the rest of his parts are of sub-standard quality for our cars..
-
#7
by
guy plain
on 31 Aug, 2011 12:47
-
thanks.....i like to hear this stuff.....good to know what your getting.......and what not to get lol
-
#8
by
ToddA1
on 05 Sep, 2011 22:28
-
I've been on the fence about ordering that 1.9 pump camplate for my 1.6 pump, for months. I figure it's just a plate with bumps.... that's a simple part to make, right?
-Todd
-
#9
by
R.O.R-2.0
on 05 Sep, 2011 22:50
-
I've been on the fence about ordering that 1.9 pump camplate for my 1.6 pump, for months. I figure it's just a plate with bumps.... that's a simple part to make, right?
-Todd
correct..
you would think so atleast?
unless they use inferior alloys to cast them. then they would have accelerated wear..
-
#10
by
ToddA1
on 05 Sep, 2011 23:19
-
correct..
you would think so atleast?
unless they use inferior alloys to cast them. then they would have accelerated wear..
Yeah, but realize that there are rollers riding those bumps, lol. I'll probably never pull the trigger. It's not the $35, but all the work that's needed to replace that $35 plate if something goes amiss.
-Todd
-
#11
by
R.O.R-2.0
on 06 Sep, 2011 00:13
-
correct..
you would think so atleast?
unless they use inferior alloys to cast them. then they would have accelerated wear..
Yeah, but realize that there are rollers riding those bumps, lol. I'll probably never pull the trigger. It's not the $35, but all the work that's needed to replace that $35 plate if something goes amiss.
-Todd
so what are you saying? since there are rollers, the cam plate CANT WEAR? ive torn into several pumps with worn cam plates. not worn beyond use, but you could definitely tell they were not brand new anymore..
those rollers still exert alot of force on that cam plate as it rolls over them. remember, the pump head has some STRONG springs pushing back at the plunger and cam plate..
-
#12
by
maxfax
on 06 Sep, 2011 03:28
-
Todd, IIRC Tyler made comments of tearing down some pumps with the cheapo cam plates (prothe) that were shot in very sort order (maybe like 25K miles?)
-
#13
by
ToddA1
on 06 Sep, 2011 21:48
-
Oh well.... kinda figured it would be too good to be true.
-Todd
-
#14
by
rabbitman
on 07 Sep, 2011 00:08
-
I've heard of 'em breaking too.