is this still a good donor for a 11mm pump swap? - IDI Engine - VWDiesel.net The IDI, TDI, and mTDI source.

• is this still a good donor for a 11mm pump swap? by carrizog60 on 18 Aug, 2011 17:21
• hi
  
  when doing a plunger swap do i need the head or can i put my head and all the other bits of the pump donor?
  because of this:
  
  
  thanks
• #1 by R.O.R-2.0 on 19 Aug, 2011 12:08
• that head has an 11mm bore, for an 11mm plunger.
  
  does your other head have an 11mm bore? if not, then no dice. usually the pump head, and plunger are manufactured as a matched set..
• #2 by carrizog60 on 20 Aug, 2011 05:03
• ok,thanks.
  it was going to serve as a donor for a bigger head swap but if its unmatch then bad luck.
  
  is that such a difference that cant be done?
• #3 by carrizog60 on 20 Aug, 2011 10:38
• that one as,from what i can see, a broken delivery valve right?
  if i put the aaz delivery valves that can work?or is going to spray diesel everywere from there?
• #4 by carrizog60 on 21 Aug, 2011 13:58
• no one?
• #5 by R.O.R-2.0 on 21 Aug, 2011 14:16
• well, you need to get that DV out first..
• #6 by carrizog60 on 21 Aug, 2011 14:50
• i can take it out.
  other than that should be ok?
• #7 by R.O.R-2.0 on 21 Aug, 2011 14:56
• start experimenting.. let us know.
  
  its not going to blow up in your face like a bomb.. its either going to work, or not going to work..
• #8 by carrizog60 on 22 Aug, 2011 08:37
• dont want to spend 50 or more euros on a chance...
  its on ebay still