« previous next »
Pages: [1]

Author Topic: Garret 2256vk  (Read 4665 times)

March 14, 2011, 06:21:35 am

theman53

  • Global Moderator
  • Veteran
  • Offline
  • ***
  • 7835
  • Personal Text
    Holmes County Ohio - North Central Ohio
Garret 2256vk
« on: March 14, 2011, 06:21:35 am »
GT2256V- 2001-2006 Dodge/Freightliner/Mercedes Sprinter 2.7L CDI.
NOTE: The compressor housing covers are not interchangeable between the 01-03 and 04-06 series turbos. The 04-06 has a slightly larger (.5mm) compressor inducer.

Compressor
Inducer: 40.3mm
Exducer: 56mm (51.8 Trim)
Housing Inlet: 60mm
Housing Outlet: 35mm
.53 A/R

Turbine
Inducer: 49.4mm (est.)
Exducer: 41.7mm
.64 A/R

On a 1.6 Will this work? OR how will this work is what I should be asking.
Logged
Reply #1March 14, 2011, 09:28:10 am

Alcaid

  • Veteran
  • Offline
  • ***
  • 549
Re: Garret 2256vk
« Reply #1 on: March 14, 2011, 09:28:10 am »
The 270CDI turbo is not a VK, it has the vacuum actuator so it's a GT2256V. If you're going big VNT why don't you go for the newer and quicker spooling /lower EMP generation, the GTB? GTB1756VK, GTB2056VK, GTB2260VK etc.

How are you planning to control the VNT mechanism?
Logged
'03 VW Golf PD130 4Motion Highline
'10 VW Passat 1.6TDI Highline
'83 VW Jetta 1.6TD, 11mm pump, H-beam rods, girdle, fully reworked AAZ head +++ Going Compound ;)
Reply #2March 14, 2011, 03:07:22 pm

theman53

  • Global Moderator
  • Veteran
  • Offline
  • ***
  • 7835
  • Personal Text
    Holmes County Ohio - North Central Ohio
Re: Garret 2256vk
« Reply #2 on: March 14, 2011, 03:07:22 pm »
Price and availability is why I am going that route :D
Logged
Reply #3March 14, 2011, 03:40:47 pm

Alcaid

  • Veteran
  • Offline
  • ***
  • 549
Re: Garret 2256vk
« Reply #3 on: March 14, 2011, 03:40:47 pm »
Two reasons both good enough :) Go ahead! ;D
Logged
'03 VW Golf PD130 4Motion Highline
'10 VW Passat 1.6TDI Highline
'83 VW Jetta 1.6TD, 11mm pump, H-beam rods, girdle, fully reworked AAZ head +++ Going Compound ;)
Reply #4March 14, 2011, 03:44:47 pm

theman53

  • Global Moderator
  • Veteran
  • Offline
  • ***
  • 7835
  • Personal Text
    Holmes County Ohio - North Central Ohio
Re: Garret 2256vk
« Reply #4 on: March 14, 2011, 03:44:47 pm »
I am just wondering what it will do on a daily. I am sure it will make power up top, but what about down low? The problem I have now is not enough cold air to run more fuel. This should do it I am hoping, but at what cost to low rpm power?
Logged
Reply #5March 14, 2011, 08:09:01 pm

rallydiesel

  • Veteran
  • Offline
  • ***
  • 1880
Re: Garret 2256vk
« Reply #5 on: March 14, 2011, 08:09:01 pm »
I don't think there is much info on using the larger vnts on IDI engines. I have a gt2559v I am putting on AAZ with mechanical vnt control and how no idea how it will be for lower end response. Similar reasons as you. I got the gt2559v for an incredible price so why not slap it on there, right?
Logged
2006 Jetta TDI - gtb1749v, Malone 2, Frank's Titan 2 cam, VR6 clutch....
1991 Jetta TD - sold :(
2001 Golf TDI - Son's
1981 Rabbit - BEW tdi swap project

"ONCE YOU GO CLACK, YOU NEVER GO BACK"
Pages: [1]
« previous next »