-
#30 by ibizz on 21 Mar, 2011 02:57
-
this work is impressive !
keep up the good work ! -
#31 by zukgod1 on 22 Mar, 2011 11:06
-
What material did you use to weld the new flange on?
Looks good..
-
#32 by Aki-76 on 26 Mar, 2011 01:23
-
#33 by Aki-76 on 31 Mar, 2011 10:40
-
First tought the engine i used last summer, wouldbeen complete and almost ready to use in caddy. Atleast all thoseparts inside the block.
I was quite surprise when i took the pistons off
http://aki76.kuvat.fi/kuvat/vento+TTSI/repe%E4m%E4.jpg
Yes, the block is cracked
new engine block
http://aki76.kuvat.fi/kuvat/Caddy+Mk+I/caddyn+tekniikka/p%E4%E4si%E4ismoottori.jpg
http://aki76.kuvat.fi/kuvat/Caddy%20Mk%20I/caddyn%20tekniikka/runkolaakeripukit+ojennuksessa.jpg
http://aki76.kuvat.fi/kuvat/Caddy+Mk+I/caddyn+tekniikka/tarkempaa+kuvaa+pukeista.jpg
-
#34 by theman53 on 01 Apr, 2011 06:06
-
Can't go wrong with that color
-
#35 by R.O.R-2.0 on 01 Apr, 2011 08:30
-
!!!!!!HOLY CRAP!!!!!!!!!
look at those main caps, batman!
-
#36 by jiggs on 07 Apr, 2011 19:11
-
Impressive
-
#37 by Aki-76 on 09 Apr, 2012 05:00
-
#38 by jiggs on 01 May, 2012 18:00
-
now thats business
not understanding the internal WG turbo and the external WG.
how are you going to cool that much power?
excelent! -
#39 by gnavs on 02 May, 2012 23:49
-
Jesus H Christ!
-
#40 by Aki-76 on 03 May, 2012 08:39
-
Look again.Turbo has NO wastgate..
-
#41 by R.O.R-2.0 on 03 May, 2012 10:55
-
that wastegate dump is bigger than most of our downpipes!
-
#42 by Aki-76 on 05 May, 2012 09:20
-
#43 by R.O.R-2.0 on 05 May, 2012 11:17
-
New piston desing
http://aki76.kuvat.fi/kuvat/vento%20TTSI/DSC_7846.jpg
those pistons CROWNS are coated, arent they?
and can you tell us the reason you did the arrow shaped combustion chamber, rather than clover leaf?
there HAS to be some reason as to why you did it that way. -
#44 by Aki-76 on 26 May, 2012 23:37
-
jep,piston is ceramic coated top and teflon coated skirt.very slippy
engine every bearing is allso teflon coated.
http://aki76.kuvat.fi/kuvat/red%20devil%20projekt/DSC_0079.jpg
cylinder is honed extra fine stone.
http://aki76.kuvat.fi/kuvat/red%20devil%20projekt/DSC_7851.jpg
Some radiator fitting:
http://aki76.kuvat.fi/kuvat/red%20devil%20projekt/DSC_7855.jpg
And engine fitting :
http://aki76.kuvat.fi/kuvat/red+devil+projekt/DSC_7951.jpg