...BTW your Bieber avatar is awesome.-Malone
That looks just like Andrew's link in his sig line.
Do you have a price in mind to buy the tool for? i will take one if it is reasonable.
Quote from: ilikevwdiesel on October 29, 2010, 06:31:47 pmI just used the tool again, this time on an AAZ crank (the one pictured above is a 1.6 TD core I had kicking around). This crank had to be removed from the engine because somehow it had almost 2mm of taper on the face of the crank snout. A local machinist welded the nose and re-squared the face.You can true up the face of the crank by pulling the cam to eliminate the possibility of valve/piston contact and then running the starter while grinding the face of crank nose.
I just used the tool again, this time on an AAZ crank (the one pictured above is a 1.6 TD core I had kicking around). This crank had to be removed from the engine because somehow it had almost 2mm of taper on the face of the crank snout. A local machinist welded the nose and re-squared the face.
Will you be including the broach with your offering? What size did you use in your design?