« previous next »
Pages: [1] 2

Author Topic: FS Parting out 2 1991 TD Jetta's  (Read 7711 times)

September 30, 2010, 07:26:46 pm

abnkeis

  • Guest
FS Parting out 2 1991 TD Jetta's
« on: September 30, 2010, 07:26:46 pm »
I was in the process of rebuilding my Jetta, but don't have the time to finish.

I have a 1.6td block cleaned, bored and honed for second oversize pistons.
I have a brand new set of second oversize pistons.
Fully rebuilt head.................SOLD
Complete turbo set up.................SOLD
Good Injection Pump
New Rod Bearings
New Main Bearings
Intermediate shaft that has been turned down (lobe machined off) and balanced......SOLD
Custom 2.5" mandrel bent downtube and exhaust...............SOLD
Bilstein Shocks
Car itself is black with virtually no rust
Engine and Tranny are removed.
Everything is available that is on the car.

I also have a parts car that has the engine still in it, but was told the head gasket went out.
It has a turbo block.
I have pulled a few parts, such as: belts, AC, valve cover, IP. all are still available just not installed.
Car itself is white with just a few small rust spots.

Also have several small intercoolers
Anything you don't see listed just ask.

Block: 250
Head: 400.........SOLD
Turbo package: 350...........SOLD
Injector Pump from Running Engine: 275
Injector Pump with seal leak: 150
Custom Intermediate Shaft: 50.........SOLD
K24 Turbo: 200


The following I just bought new:
Pistons - 1.6 TD Kolbenschmidt .20 over (.5mm) $ 340
Mains (glyco) = 50
Rod bearings = 26
Thrust washers = 17
Set of 10 bottom end stretch bolts that are to be replaced = 30.......SOLD
int shaft bearings = 35

Looking for best offer on these new parts.

http://keis779.fileave.com/Parts_1.jpg  
http://keis779.fileave.com/Parts_10.jpg  
http://keis779.fileave.com/Parts_11.jpg  
http://keis779.fileave.com/Parts_12.jpg  
http://keis779.fileave.com/Parts_13.jpg  
http://keis779.fileave.com/Parts_16.jpg  
http://keis779.fileave.com/Parts_2.jpg  
http://keis779.fileave.com/Parts_3.jpg
http://keis779.fileave.com/Parts_4.jpg  
http://keis779.fileave.com/Parts_7.jpg  
http://keis779.fileave.com/Parts_9.jpg


« Last Edit: November 27, 2010, 09:32:22 am by abnkeis »
Logged
Reply #1October 01, 2010, 08:28:40 am

Dakotakid

  • Veteran
  • Offline
  • ***
  • 1240
Re: FS Parting out 2 1991 TD Jetta's
« Reply #1 on: October 01, 2010, 08:28:40 am »
PM'ed you on Friday morning regarding some of the parts.
Logged
The mask and the shot(s) are actually an IQ test. If you are wearing or circulating, you just failed the test. I can't feel sorry for you.
Reply #2October 01, 2010, 01:08:17 pm

R.O.R-2.0

  • Veteran
  • Offline
  • ***
  • 7335
  • Personal Text
    Pacific Northwest - Oregon - USA
Re: FS Parting out 2 1991 TD Jetta's
« Reply #2 on: October 01, 2010, 01:08:17 pm »
any chance you have a DSM intercooler? one out of a 1st gen eclipse? or anything similar? any that are completely metal? not interested in plastic tanked units..
Logged
92 Jetta GLI - Black, 1.6D w/ GT2056V turbo..
86 GTI - 4 Door, Med Twilight Gray, Tow Machine..
86 Audi Coupe GT - Tornado Red, All Stock.. WRECKED.
89 Toyota 4Runner - Dark Grey Metallic, LIFTED!

Turbo: exhaust gasses go into the turbocharger and spin it, witchcraft happens and you go faster.
Reply #3October 01, 2010, 02:09:01 pm

abnkeis

  • Guest
Re: FS Parting out 2 1991 TD Jetta's
« Reply #3 on: October 01, 2010, 02:09:01 pm »
I do have one intercooler that is all aluminum. I believe it is from a SAAB. I can send pics or try to post some later.
Logged
Reply #4October 02, 2010, 03:13:04 pm

dropdtop

  • User+
  • Offline
  • *
  • 37
Re: FS Parting out 2 1991 TD Jetta's
« Reply #4 on: October 02, 2010, 03:13:04 pm »
Very interested in that exhaust and downtube. setup

Got any picks of it?

Will actually be traveling to KS in november too.
Logged
Reply #5October 02, 2010, 03:21:35 pm

dropdtop

  • User+
  • Offline
  • *
  • 37
Re: FS Parting out 2 1991 TD Jetta's
« Reply #5 on: October 02, 2010, 03:21:35 pm »
I also got a list of stuff that I need:

Alternator (Bosch w/ "W" terminal)
Drivers side Mirror With door control cable
Radiator fan Motor (4 terminal motor) with the pigtail

Looking for a intercooler setup.

E-mail me at [email protected]
Logged
Reply #6October 03, 2010, 06:45:46 pm

abnkeis

  • Guest
Re: FS Parting out 2 1991 TD Jetta's
« Reply #6 on: October 03, 2010, 06:45:46 pm »
Quote from: dropdtop on October 02, 2010, 03:21:35 pm
I also got a list of stuff that I need:

Alternator (Bosch w/ "W" terminal)
Drivers side Mirror With door control cable
Radiator fan Motor (4 terminal motor) with the pigtail

Looking for a intercooler setup.

E-mail me at [email protected]

Just posted pics for the Downtube (#16 pic I believe)
I will be checking on the rest of your list tomorrow.
Logged
Reply #7October 05, 2010, 01:01:04 am

Kudagra

  • Veteran
  • Offline
  • ***
  • 738
    • www.no-coast.com
Re: FS Parting out 2 1991 TD Jetta's
« Reply #7 on: October 05, 2010, 01:01:04 am »
holy crap...local diesel parts?? I dont have to smuggle out of Kanada??

Might have to talk about the head/downpipe/turbo

I live south of Lawrence. Text is best since its always noisy where Im working. Thing is Im going to California for a week this Friday.

PM Sent with number
Logged
Turbo boost libido and passive restraints
And as of yet I haven't heard even a single complaint
I've got the tools of the trade and a fuel injected heart
Efficiency is beautiful, efficiency is art
Reply #8October 05, 2010, 06:35:33 am

clarkrep

  • Junior
  • Offline
  • **
  • 117
Re: FS Parting out 2 1991 TD Jetta's
« Reply #8 on: October 05, 2010, 06:35:33 am »
I'm interested in the block with pistons. I live near Lawrence and have no problem comin out that way for some parts. PM me a phone # so we can talk.
Thanks,
Aaron
Logged
'79 Rabbit Diesel L 1.5
'83 Rabbit GTI 1.6TD
Reply #9October 05, 2010, 03:43:28 pm

abnkeis

  • Guest
Re: FS Parting out 2 1991 TD Jetta's
« Reply #9 on: October 05, 2010, 03:43:28 pm »
Prices added!!!
Logged
Reply #10November 20, 2010, 11:45:52 am

cervelorod

  • User+
  • Offline
  • *
  • 41
Re: FS Parting out 2 1991 TD Jetta's
« Reply #10 on: November 20, 2010, 11:45:52 am »
Do you have airbox and snorkel(?) to turbo and the turbo to manifold elbow?  I'm adding a turbo to a NA so not necessarily trying to match something.

Shipping to 98837 if you have any of this.

Rod
Logged
Reply #11November 21, 2010, 03:10:44 pm

abnkeis

  • Guest
Re: FS Parting out 2 1991 TD Jetta's
« Reply #11 on: November 21, 2010, 03:10:44 pm »
I do have the snorkel, but I'm trying to keep it as part of the set with the turbo and manifold right now.
Logged
Reply #12November 22, 2010, 05:18:04 pm

KinseyJ

  • Newbie
  • Offline
  • *
  • 11
Re: FS Parting out 2 1991 TD Jetta's
« Reply #12 on: November 22, 2010, 05:18:04 pm »
Do you have a gauge cluster with a tach?
Logged
91' jetta 1.6TD, G60 intake manifold, GTD injectors, FMIC, custom downpipe, 2.5" straitpipe exhaust, oversized pistons, fresh rebuild, running 10 psi. finally done!! 9 gruelling months of late nights in the garage.
Reply #13November 23, 2010, 02:11:23 pm

LC

  • Newbie
  • Offline
  • *
  • 9
Re: FS Parting out 2 1991 TD Jetta's
« Reply #13 on: November 23, 2010, 02:11:23 pm »
is the turbo a k14 and if so how much for the turbo alone shipped to Griffin, GA. 30223  please email me at   [email protected]   thanks  Lamar
Logged
Reply #14November 26, 2010, 11:52:34 am

funkaholik

  • Junior
  • Offline
  • **
  • 88
    • http://funkaholik.tripod.com/index.html
Re: FS Parting out 2 1991 TD Jetta's
« Reply #14 on: November 26, 2010, 11:52:34 am »
pm SENT
Logged
Erik Miller
---------------------------
1981 VW Caddy - 1.6TD 
2005 Infiniti G35 - Vortech supercharged, drinking E85
1967 Mustang - 390 4 speed - for sunny days
1970 Datsun SPL311 Roadster - hibernating...
Pages: [1] 2
« previous next »