I was in the process of rebuilding my Jetta, but don't have the time to finish.
I have a 1.6td block cleaned, bored and honed for second oversize pistons. I have a brand new set of second oversize pistons. Fully rebuilt head.................SOLD Complete turbo set up.................SOLD Good Injection Pump New Rod Bearings New Main Bearings Intermediate shaft that has been turned down (lobe machined off) and balanced......SOLD Custom 2.5" mandrel bent downtube and exhaust...............SOLD Bilstein Shocks Car itself is black with virtually no rust Engine and Tranny are removed. Everything is available that is on the car.
I also have a parts car that has the engine still in it, but was told the head gasket went out. It has a turbo block. I have pulled a few parts, such as: belts, AC, valve cover, IP. all are still available just not installed. Car itself is white with just a few small rust spots.
Also have several small intercoolers Anything you don't see listed just ask.
Block: 250 Head: 400.........SOLD Turbo package: 350...........SOLD Injector Pump from Running Engine: 275 Injector Pump with seal leak: 150 Custom Intermediate Shaft: 50.........SOLD K24 Turbo: 200
The following I just bought new: Pistons - 1.6 TD Kolbenschmidt .20 over (.5mm) $ 340 Mains (glyco) = 50 Rod bearings = 26 Thrust washers = 17 Set of 10 bottom end stretch bolts that are to be replaced = 30.......SOLD int shaft bearings = 35
PM'ed you on Friday morning regarding some of the parts.
#2
byR.O.R-2.0on 01 Oct, 2010 13:08
any chance you have a DSM intercooler? one out of a 1st gen eclipse? or anything similar? any that are completely metal? not interested in plastic tanked units..
#3
byabnkeison 01 Oct, 2010 14:09
I do have one intercooler that is all aluminum. I believe it is from a SAAB. I can send pics or try to post some later.
#4
bydropdtopon 02 Oct, 2010 15:13
Very interested in that exhaust and downtube. setup
Got any picks of it?
Will actually be traveling to KS in november too.
#5
bydropdtopon 02 Oct, 2010 15:21
I also got a list of stuff that I need:
Alternator (Bosch w/ "W" terminal) Drivers side Mirror With door control cable Radiator fan Motor (4 terminal motor) with the pigtail
Just posted pics for the Downtube (#16 pic I believe) I will be checking on the rest of your list tomorrow.
#7
byKudagraon 05 Oct, 2010 01:01
holy crap...local diesel parts?? I dont have to smuggle out of Kanada??
Might have to talk about the head/downpipe/turbo
I live south of Lawrence. Text is best since its always noisy where Im working. Thing is Im going to California for a week this Friday.
PM Sent with number
#8
byclarkrepon 05 Oct, 2010 06:35
I'm interested in the block with pistons. I live near Lawrence and have no problem comin out that way for some parts. PM me a phone # so we can talk. Thanks, Aaron
#9
byabnkeison 05 Oct, 2010 15:43
Prices added!!!
#10
bycervelorodon 20 Nov, 2010 11:45
Do you have airbox and snorkel(?) to turbo and the turbo to manifold elbow? I'm adding a turbo to a NA so not necessarily trying to match something.
Shipping to 98837 if you have any of this.
Rod
#11
byabnkeison 21 Nov, 2010 15:10
I do have the snorkel, but I'm trying to keep it as part of the set with the turbo and manifold right now.
#12
byKinseyJon 22 Nov, 2010 17:18
Do you have a gauge cluster with a tach?
#13
byLCon 23 Nov, 2010 14:11
is the turbo a k14 and if so how much for the turbo alone shipped to Griffin, GA. 30223 please email me at [email protected] thanks Lamar