« previous next »
Pages: 1 [2]

Author Topic: VE pump parts  (Read 7535 times)

Reply #15December 08, 2005, 09:05:38 am

RabbitGTDguy

  • Veteran
  • Offline
  • ***
  • 1274
VE pump parts
« Reply #15 on: December 08, 2005, 09:05:38 am »
I'd def. be interested in the triangle socket and if your setup for timing tools...i'd take a set of them too. I'm sure we could get with mark and post this as a group buy in the group buy/vendors forum...  I can also pull from the Vortex too, many that have been asking me about the m-TDI project on the Rabbit, etc. too that are looking for good deals on timing tools, etc...

I know of another that can use the triangle socket too...so count me in for two :)

Joe
Logged
1979 Rabbit mTDI crazy $*(\%& bunny...
1972 VW Westfalia
2009 VW Tiguan SE 2.0T (Wife's car)
2001 Audi TT 225 Quattro Roadster (something newer :) )
Reply #16December 08, 2005, 10:20:22 am

fspGTD

  • Veteran
  • Offline
  • ***
  • 1529
    • http://home.comcast.net/~vwgtd
VE pump parts
« Reply #16 on: December 08, 2005, 10:20:22 am »
One triangle socket needed here.  :)
Logged
Jake Russell
'81 VW Rabbit GTD Autocrosser 1.6lTD, SCCA FSP Class
Dieselicious Turbocharger Upgrade/Rebuild Kits
Reply #17December 08, 2005, 10:26:47 am

malone

  • Moderator
  • Veteran
  • Offline
  • ***
  • 1156
    • Malone Tuning Ltd.
VE pump parts
« Reply #17 on: December 08, 2005, 10:26:47 am »
Another one for me. Gotta love collecting speciality tools  :)
Logged
http://www.tunezilla.com
93 Eurovan AHU TDI
96 Golf 1.9L ASV TDI - I bought it back!
97 Golf Variant Syncro 1.9L 1Z TDI - sold and missed
11 Golf 2.0L CJAA TDI DSG - Stage 4
14 Golf Wagon 2.0L CJAA TDI DSG - Sold
17 BMW 328d wagon - Sold
09 BMW 335d 3.0L
Reply #18December 08, 2005, 11:39:45 am

935racer

  • Guest
VE pump parts
« Reply #18 on: December 08, 2005, 11:39:45 am »
:(  I feel so left out. I might have to buy one as well.
Logged
Reply #19December 08, 2005, 01:54:56 pm

vwmike

  • Authorized Vendor
  • Veteran
  • Offline
  • ***
  • 1158
VE pump parts
« Reply #19 on: December 08, 2005, 01:54:56 pm »
I suppose I might take up the opportunity as well....my cut down 12mm works and all, but a real socket would be nice.
Logged
Reply #20December 08, 2005, 02:39:40 pm

935racer

  • Guest
VE pump parts
« Reply #20 on: December 08, 2005, 02:39:40 pm »
Mike, I had a homemade socket as well, wasn't too bad, but the real thing is sooo much nicer to work with, especially for those bolts that are really torqued down. You can't beat the price!
Logged
Reply #21December 10, 2005, 02:13:53 am

fatmobile

  • Veteran
  • Offline
  • ***
  • 2924
    • http://www.geocities.com/vwfatmobile/
injection pump tools
« Reply #21 on: December 10, 2005, 02:13:53 am »
If you are digging that far into an injection pump you should get one of these tools too:
 
 The 2 pronged tool on the right fits the nut it's pointing toward.

Here's a picture of my home made tool for removing the triangle bolt. A 12mm, 6 point socket, with every other flat ground out:
Logged
Tornado red, '91 Golf 4 door, with M-TDI 12mm pump, south bend clutch, VNT-15 turbo, 02A trany
MK4s: 2000 TDI jetta, 2003 TDI wagon, 2000 golf 2.0 gasser.
'84 Rabbit with 1.7TD KY block pistons bored to 80mm, VNT-15
'84 GTI with stock 1.6TD starion intercooler.
Reply #22December 12, 2005, 12:12:13 pm

935racer

  • Guest
VE pump parts
« Reply #22 on: December 12, 2005, 12:12:13 pm »
Fatmobile, I have never come across that nut I see there for the governor shaft, all of the ones I have built for VE's are just a 13mm...

So would you guys also be interested in IDI timing tools? cam lock, pump lock, spanner wrench for tensioner and dial indicator?
Logged
Pages: 1 [2]
« previous next »