Author Topic: VE pump parts (Read 7662 times)

Kudagra · « **on:** December 05, 2005, 08:25:04 pm »

Ok I used the search feature and my ADD had taken over...

Where can I get seals and vanes for my VE pump?

How about boost pins? Are new ones available of do I have to scrounge in the junk yard?

What is the Star (wheel) spring?

935racer · « **Reply #1 on:** December 05, 2005, 10:30:20 pm »

We sell seal kits for bosch VE pumps. Price kind of varies on how complete you would like it. What do you mean by vanes in the pump? I can source any internal parts you may need as well. IF you are planning on rebuilding a pump there are a lot more internal pieces that need to be replaced than you would think. Its pretty easy to spend $300-400 on just parts rebuilding an injection pump. I can also get the retarded triangle shaped socket for removing the lever assembly on the pumps, but you don't want to know how much it costs :shock:

QuickTD · « **Reply #2 on:** December 06, 2005, 07:12:30 am »

Quote

I can also get the retarded triangle shaped socket for removing the lever assembly on the pumps

I made a run of these once. If there was a demand I could likely do it again, I still have the programs on disk. I don't really want to get involved in the distribution of product, but I can certainly manufacture it. With all these new diesel tuning companies springing up, maybe one would like to take on a line of QuickTD tools?

vwmike · « **Reply #3 on:** December 06, 2005, 12:11:46 pm »

That's something to think about.

935racer · « **Reply #4 on:** December 06, 2005, 02:07:50 pm »

I'd liek to at least see one

Unfortunately I already took out a loan for my bosch socket.

RabbitGTDguy · « **Reply #5 on:** December 06, 2005, 02:56:48 pm »

QuickTD...i'd be interested in one...how many do you need to get to "make a run" and how much might they be?

Joe

Kudagra · « **Reply #6 on:** December 06, 2005, 05:35:27 pm »

Quote from: "935racer"

What do you mean by vanes in the pump?

Ii was told mine needs seals and the lift pump redone. The lift pump is a Vane Pump. Ill send ya a email for a price quote.

I still need to get one of FastGTPs turbo kits.

QuickTD · « **Reply #7 on:** December 06, 2005, 07:55:14 pm »

Quote

I'd liek to at least see one Unfortunately I already took out a loan for my bosch socket.

Quote

QuickTD...i'd be interested in one...how many do you need to get to "make a run" and how much might they be?

I would like a run to consist of at least 10pcs, otherwise I have to charge too much,

The CNC setup is kind of a pain for one or two...

Marc (Redrotors) has been a low volume distributer in the past, and seems willing to do it again. Perhaps we can get something going... I imagine price could be kept in the $15-20CDN area? Depending on volume, the higher the demand the cheaper it becomes as the setup time/run time ratio improves.

Stay tuned...

935racer · « **Reply #8 on:** December 06, 2005, 08:18:14 pm »

Wow that is cheap! my bosch one was around $60 CAD. Will these be made using a 3/8 socket drive?

QuickTD · « **Reply #9 on:** December 06, 2005, 08:53:59 pm »

Quote

Wow that is cheap! my bosch one was around $60 CAD. Will these be made using a 3/8 socket drive?

No doubt the bosch tool will be of excellent quality, and it shows in the cost.

Yes, the triangle sockets do have a 3/8 drive. I keep things inexpensive in a couple of ways. First, I don't have in house heat treating facilities, so I make all my tools from pre heat treated 4140 steel. This material is soft enough to machine (with carbide) but is still plenty durable for DIY use. Wall thickness is heavier than your average socket, so strength is not an issue. To my knowledge none have ever been broken. Black oxide coating is the norm, no chrome toolbox jewelry here, function takes priority. Basically, if you can live without the chrome you can save yourself 40 bucks.

935racer · « **Reply #10 on:** December 07, 2005, 11:30:41 am »

Wow sure wish I could have gotten one of these before I bought my bosch one.

Patrick · « **Reply #11 on:** December 07, 2005, 03:02:20 pm »

Maybe we're stealing the thread, but how about pump timing tools? Are you set up for them too Quick TD? Really got to get a set!

935racer · « **Reply #12 on:** December 07, 2005, 03:18:55 pm »

We sell vwdiesel engine/pump timing tools. www.pasengerperformance.com
Should be up on the website tonight or tomorrow. Sorry for the thread jack.

Kudagra · « **Reply #13 on:** December 07, 2005, 09:32:50 pm »

Quote from: "Patrick"

Maybe we're stealing the thread, but how about pump timing tools? Are you set up for them too Quick TD? Really got to get a set!

Steal away. Its all stuff I want to know anyway.

Im in for that socket.

Dave- Put more stuff you sell on your site so I know what I can get from ya. All those prices are Canadian Dollars correct?

malone · « **Reply #14 on:** December 07, 2005, 09:37:44 pm »

Quote from: "Kudagra"

Dave- Put more stuff you sell on your site so I know what I can get from ya. All those prices are Canadian Dollars correct?

Look at the bottom of the left bar on the site, there are options to select CAD or EUR currency.