-
#60
by
catlin_cava
on 14 Jul, 2010 14:51
-
Looks sweet man, I can't wait to see it running
-
#61
by
Thezorn
on 16 Jul, 2010 18:15
-
If you don't have a good D.I.Y for the boost pressure controll or Manula Boost Controller let me know. I just made my own for about 15 bucks and it work amazing, opens up right at 15 psi and it could easily open at any boost level. I can take some pictures and show you how I did it if you want.
Will.
-
#62
by
arsenicpants
on 16 Jul, 2010 21:18
-
I can take some pictures and show you how I did it if you want.
Will.
I'd like to see that, please
-
#63
by
RadoTD
on 16 Jul, 2010 21:55
-
I can take some pictures and show you how I did it if you want.
Will.
I'd like to see that, please
+1
I the wastegate on my K14 is so finicky, I've given up for now
-
#64
by
zagarus
on 17 Jul, 2010 00:24
-
looks like it's coming together quite nicely!
-
#65
by
Thezorn
on 17 Jul, 2010 00:57
-
Ill take pictures tomorrow and post them up here for you guys.
-
#66
by
Smokey Eddy
on 17 Jul, 2010 01:20
-
If you don't have a good D.I.Y for the boost pressure controll or Manula Boost Controller let me know. I just made my own for about 15 bucks and it work amazing, opens up right at 15 psi and it could easily open at any boost level. I can take some pictures and show you how I did it if you want.
Will.
this is very kind of you! However, i do not want to waste boost that's already being produced and allow the turbo to over spool with lots of fueling. I NEED to run a working adjustable waste gate.
Unless... what you're talking about IS related to a waste gate and doesn't just blow off boost pressure like a blow off valve...
-
#67
by
burn_your_money
on 17 Jul, 2010 10:06
-
Are you done yet?
-
#68
by
Rabbit on Roids
on 17 Jul, 2010 10:08
-
Eddy, a boost controller just holds the WG closed until a certain set pressure, then it "pops" open, it doesnt open 30% at 8psi, 60% by 12 psi, on and on.. it is completely closed until the set pressure, then it pops open. makes for quicker spool up too..
-
#69
by
Smokey Eddy
on 17 Jul, 2010 10:59
-
Eddy, a boost controller just holds the WG closed until a certain set pressure, then it "pops" open, it doesnt open 30% at 8psi, 60% by 12 psi, on and on.. it is completely closed until the set pressure, then it pops open. makes for quicker spool up too..
oh ok so that is what thezorn is talking about then?
and almost tyler. i cant get my turbo apart so im going to say screw it.
-
#70
by
burn_your_money
on 17 Jul, 2010 11:10
-
and almost tyler. i cant get my turbo apart so im going to say screw it.
Good you'll like the NA a lot more anyways
-
#71
by
Smokey Eddy
on 17 Jul, 2010 11:11
-
Oh im still going to use it. I'm not a fool. I just can't change the hot side bearing is all. it wasn't leaking anyways.
-
#72
by
burn_your_money
on 17 Jul, 2010 11:12
-
HEY! what are you saying?
I knew what you meant, I was just messin with ya
-
#73
by
Smokey Eddy
on 17 Jul, 2010 11:13
-
Oh okay
im not saying anything
-
#74
by
Smokey Eddy
on 17 Jul, 2010 11:19
-
With the plate in there the push rod actually pushes on something! Hurray!