The Rebirth of Smokey Eddy - The 1.9 Saga

[catlin_cava]

Looks sweet man, I can't wait to see it running

[Thezorn]

If you don't have a good D.I.Y for the boost pressure controll or Manula Boost Controller let me know. I just made my own for about 15 bucks and it work amazing, opens up right at 15 psi and it could easily open at any boost level. I can take some pictures and show you how I did it if you want.

Will.

[arsenicpants]

I can take some pictures and show you how I did it if you want.

Will.

I'd like to see that, please

[RadoTD]

I can take some pictures and show you how I did it if you want.

Will.

I'd like to see that, please

+1
I the wastegate on my K14 is so finicky, I've given up for now

[zagarus]

looks like it's coming together quite nicely! 

[Thezorn]

Ill take pictures tomorrow and post them up here for you guys.

[Smokey Eddy]

If you don't have a good D.I.Y for the boost pressure controll or Manula Boost Controller let me know. I just made my own for about 15 bucks and it work amazing, opens up right at 15 psi and it could easily open at any boost level. I can take some pictures and show you how I did it if you want.

Will.

this is very kind of you! However, i do not want to waste boost that's already being produced and allow the turbo to over spool with lots of fueling. I NEED to run a working adjustable waste gate.
Unless... what you're talking about IS related to a waste gate and doesn't just blow off boost pressure like a blow off valve...

[burn_your_money]

Are you done yet?

[Rabbit on Roids]

Eddy, a boost controller just holds the WG closed until a certain set pressure, then it "pops" open, it doesnt open 30% at 8psi, 60% by 12 psi, on and on.. it is completely closed until the set pressure, then it pops open. makes for quicker spool up too..

[Smokey Eddy]

Eddy, a boost controller just holds the WG closed until a certain set pressure, then it "pops" open, it doesnt open 30% at 8psi, 60% by 12 psi, on and on.. it is completely closed until the set pressure, then it pops open. makes for quicker spool up too..

oh ok so that is what thezorn is talking about then?
and almost tyler. i cant get my turbo apart so im going to say screw it.

[burn_your_money]

and almost tyler. i cant get my turbo apart so im going to say screw it.

Good you'll like the NA a lot more anyways

[Smokey Eddy]

Oh im still going to use it. I'm not a fool. I just can't change the hot side bearing is all. it wasn't leaking anyways.

[burn_your_money]

HEY! what are you saying?

I knew what you meant, I was just messin with ya

[Smokey Eddy]

Oh okay
im not saying anything

[Smokey Eddy]

With the plate in there the push rod actually pushes on something! Hurray!