Author Topic: How to test pump off the car? (Read 4566 times)

myke_w · « **on:** November 28, 2005, 07:07:59 am »

Is there any way to test the functionality of an IP off the car?
The one in question spins freely and stops on the lands. I would jlike to know before I put it on the car....

Justin · « **Reply #1 on:** November 28, 2005, 08:29:29 am »

put it in a vise, fill it with diesel or atf, hook up a battery to the main body and the electric fuel shut off to turn it on, hook up your injector lines and injectors, put a quart jar with diesel and put your in and out of the injection pump in the jar, then turn the pump with a drill and push on the throttle and see if you get the injectors to spray, you might have to bleed the injector lines

later
Justin

myke_w · « **Reply #2 on:** November 28, 2005, 10:51:09 am »

Wow, no kidding? Will this help to diagnose if it leaks too?

Justin · « **Reply #3 on:** November 28, 2005, 12:56:48 pm »

its what i have always done before to test them before i put it on the car, so far so good i have only done it to like 2 of them though, and you should be able to detect leaks from it since you will be building pressure in the pump

later
Justin