Author Topic: AEL timing?  (Read 4543 times)

April 11, 2010, 12:18:05 am

oldskool rich

  • Veteran

  • Offline
  • ***

  • 446
AEL timing?
« on: April 11, 2010, 12:18:05 am »
anyone know what the 5 pot AEL/AAT is timed to

my timing belt fell off  :(


f6squared I.D.S.T

Reply #1April 11, 2010, 04:41:14 am

snakemaster

  • Veteran

  • Offline
  • ***

  • 405
Re: AEL timing?
« Reply #1 on: April 11, 2010, 04:41:14 am »
i done one not to long ago no belt on her eather , got the engine to tdc and marked the pump pully in 5 at the start off lift on the plunger and moved the pump to each of the marks untill it started then did the pump timming to ear . no markes on the pump pully or a key way :( on the 5 pot pump
Glenmorangie  single highland malt

Reply #2April 11, 2010, 04:33:20 pm

oldskool rich

  • Veteran

  • Offline
  • ***

  • 446
Re: AEL timing?
« Reply #2 on: April 11, 2010, 04:33:20 pm »
there is, its a little dimond on the flyweight marks up to a dot on the pump bracket i think isnt it?

its 0.55 on a transporter will that be the same as audi?


f6squared I.D.S.T

Reply #3April 14, 2010, 09:13:02 am

gigaz2

  • Veteran

  • Offline
  • ***

  • 626
Re: AEL timing?
« Reply #3 on: April 14, 2010, 09:13:02 am »
after it starts just use vagcom to time it properly.
or are you going the Mtdi route?
________________________________________
do NOT follow my advices or opinions!!! you are warned!

Reply #4April 16, 2010, 04:21:11 am

emikkels

  • Newbie

  • Offline
  • *

  • 1
Re: AEL timing?
« Reply #4 on: April 16, 2010, 04:21:11 am »
AEL timing is 0,25mm +-0,02mm