« previous next »
Pages: [1]

Author Topic: help with N/A refresh  (Read 2425 times)

November 28, 2009, 06:25:51 am

vwjones

  • Junior
  • Offline
  • **
  • 80
help with N/A refresh
« on: November 28, 2009, 06:25:51 am »
I replaced my old, tired N/A with a GTD and now I'm eyeing the old N/A girl over in the corner of the garage and i'm thinking she might need to be rebuilt, maybe have a turbo added.  I have been thinking about a turbodiesel motorcycle or something like that, at any rate, I need some experience with the internals.
     I'm not quite sure where to begin.  The engine has about 150,000 mile on her, but I don't think she was taken very good care of.  Compression was low in all cylinders and oil was leaking out everywhere. Still started and ran but I was afraid it wouldn't be reliable.   I was hoping someone could point me the right direction as to where to begin and what I might need to rebuild.  thanks.
Logged
Reply #1November 28, 2009, 06:27:48 am

burn_your_money

  • Global Moderator
  • Veteran
  • Offline
  • ***
  • 8999
  • Personal Text
    Bright, On
Re: help with N/A refresh
« Reply #1 on: November 28, 2009, 06:27:48 am »
Purchase a Bentley service manaul for your engine and give it a good read through. That'll cover pretty much all of the bases
Logged
Tyler
Reply #2November 28, 2009, 01:18:35 pm

vwjones

  • Junior
  • Offline
  • **
  • 80
Re: help with N/A refresh
« Reply #2 on: November 28, 2009, 01:18:35 pm »
Quote from: burn_your_money on November 28, 2009, 06:27:48 am
Purchase a Bentley service manual for your engine and give it a good read through. That'll cover pretty much all of the bases

I have a bentley and it rather assumes that i'm already a mechanic.  I was more specifically referring to whether or not anyone has a recommendation as to where a person could send a head out to be redone, or if a head and rings would probably be be good enough on a lower mile motor to freshen it up.
Logged
Reply #3November 28, 2009, 03:56:56 pm

BruceM31

  • Junior
  • Offline
  • **
  • 64
Re: help with N/A refresh
« Reply #3 on: November 28, 2009, 03:56:56 pm »
Low compression....you will need the engine bored over with new pistons and rings.  Get yourself a full gasket set and find a machine shop.  The heads are usually pretty good.  Might find some cracks between valves, don;t be overly worried. Buy all new bearings and new/rebuilt injectors and slap it all back together.
Logged
Thats not a rod knockin..........its a diesel!
Reply #4November 28, 2009, 07:14:15 pm

vwjones

  • Junior
  • Offline
  • **
  • 80
Re: help with N/A refresh
« Reply #4 on: November 28, 2009, 07:14:15 pm »
thanks
Logged
Reply #5November 28, 2009, 09:23:08 pm

Dakotakid

  • Veteran
  • Offline
  • ***
  • 1240
Re: help with N/A refresh
« Reply #5 on: November 28, 2009, 09:23:08 pm »
Seriously??? Get a second job or start asking for overtime. Seems like nothing comes cheap these days...even on these!!!!
Logged
The mask and the shot(s) are actually an IQ test. If you are wearing or circulating, you just failed the test. I can't feel sorry for you.
Reply #6November 29, 2009, 05:04:09 am

vwjones

  • Junior
  • Offline
  • **
  • 80
Re: help with N/A refresh
« Reply #6 on: November 29, 2009, 05:04:09 am »
Quote from: Dakotakid on November 28, 2009, 09:23:08 pm
Seriously??? Get a second job or start asking for overtime. Seems like nothing comes cheap these days...even on these!!!!

i work in the medical field and can work seven days a week if i want.  this is for a second engine and some experience.  I don't need it to be back to brand new, just a refresh
Logged
Pages: [1]
« previous next »