Ok so im currently doing a 1.9 swap and i have a question about the one fitting on the back of the engine. I ended up swapping the t3 turbo and manifold to the 1.9 and this fitting is different.
Sorry for the sh!tty celly pics and the noob questions.
Is there anything i can do to make the fitting off the 1.6 engine work? or can i use a rubber hose?
Also, There was something attached to the small stock turbo that i have no idea what it is...
Once again sorry for being a noob. Do i use it with my t3? or take it off.
And there are wiring connections at the other end for it.
Alright sorry for all the bad pics... Hopefully this makes a little sense, im also swapping the complete mk3 harness with the motor aswell as the dash.
The car
Thanks again! I just wanna finish this swap.
See the oil return drain thread for info on the drain..
You can get a adapter and hose from ebay as a kit..
Picture two is the wastegate control valve..
Gee-Bee
So do i need that wastegate if i have one on the manifold already? Is there any alternitive for the return line? Can someone give me a link to ebay?
Thanks 10000000
Bumpppp i wanna get this swap movinnn
You could get a 1.6TD oil pan, plug the hole in the block and use the stock 1.6TD oil return line.
Correct me if I am wrong but I don't think that the stock line would be long enough
The T3 already has it's own wastegate. What you have in the picture is useless to your swap
Alright cool thanks for the reply. What would i do with the wiring and the tubing then? just plug it?
