« previous next »
Pages: [1]

Author Topic: what's the thread pitch of AAZ block turbo oil return banjo?  (Read 3616 times)

October 29, 2009, 09:01:07 am

87octane

  • Guest
what's the thread pitch of AAZ block turbo oil return banjo?
« on: October 29, 2009, 09:01:07 am »
Ain't got one. Need a pipe plug pronto. What's the mm/pitch for that fitting into the side of the block where the turbo would normally drain back?
Logged
Reply #1October 29, 2009, 02:27:47 pm

GEE-BEE

  • Veteran
  • Offline
  • ***
  • 1604
  • Personal Text
    1981 with South African front end ,42 k original
Re: what's the thread pitch of AAZ block turbo oil return banjo?
« Reply #1 on: October 29, 2009, 02:27:47 pm »
IT'S THE FINE THREAD TYPE METRIC, IF YOU CAN WAIT i CAN GET A SIZE TOMORROW

Corse 1.25 thread  Pitch

Fine 1.50 Thread Pitch

Iam going to do a 90 degree adapter ( metric to -8 flare )for a aircraft type hose
teflon with s/s fittings with a ae466 aeroquip intergal fire sleeve

I purcahed the Banjo adapter to _8 hose on ebay...

Gee-Bee
« Last Edit: October 29, 2009, 02:36:19 pm by GEE-BEE »
Logged
1.9 AAZ, CHD 5spd with Peloquin
KO4/KO3 Hybrid turbo
Giles Pump OHC
Complete Techtonics 2'5 S/S DP and Exhaust
Coilovers, MKII Pedal Swap,G60 BRAKES
MK1 JETTA DASH
675MM 16V radiator (MKII) PASSAT DUAL FAN
42K original miles , South African Front End
15x6 Le Casletts 195-45-15
Reply #2October 29, 2009, 02:50:28 pm

87octane

  • Guest
Re: what's the thread pitch of AAZ block turbo oil return banjo?
« Reply #2 on: October 29, 2009, 02:50:28 pm »
Tomorrow will be great. The local metric bolt supply house will be open Friday so I can button up the new block this weekend. I'm expecting you to say 14 or 15mm fine as a rough eyeball estimate. I can't find anything that big in my various bolt buckets.
Logged
Reply #3October 29, 2009, 07:36:51 pm

theman53

  • Global Moderator
  • Veteran
  • Offline
  • ***
  • 7835
  • Personal Text
    Holmes County Ohio - North Central Ohio
Re: what's the thread pitch of AAZ block turbo oil return banjo?
« Reply #3 on: October 29, 2009, 07:36:51 pm »
1.25 is finer than 1.50.
Logged
Reply #4October 30, 2009, 08:39:32 am

GEE-BEE

  • Veteran
  • Offline
  • ***
  • 1604
  • Personal Text
    1981 with South African front end ,42 k original
Re: what's the thread pitch of AAZ block turbo oil return banjo?
« Reply #4 on: October 30, 2009, 08:39:32 am »
my bad...  :-[

Gee-Bee
Logged
1.9 AAZ, CHD 5spd with Peloquin
KO4/KO3 Hybrid turbo
Giles Pump OHC
Complete Techtonics 2'5 S/S DP and Exhaust
Coilovers, MKII Pedal Swap,G60 BRAKES
MK1 JETTA DASH
675MM 16V radiator (MKII) PASSAT DUAL FAN
42K original miles , South African Front End
15x6 Le Casletts 195-45-15
Reply #5October 30, 2009, 03:32:14 pm

stewardc

  • Guest
Re: what's the thread pitch of AAZ block turbo oil return banjo?
« Reply #5 on: October 30, 2009, 03:32:14 pm »
I got my fittings at a local hydraulic shop.
Logged
Reply #6October 31, 2009, 04:27:49 pm

GEE-BEE

  • Veteran
  • Offline
  • ***
  • 1604
  • Personal Text
    1981 with South African front end ,42 k original
Re: what's the thread pitch of AAZ block turbo oil return banjo?
« Reply #6 on: October 31, 2009, 04:27:49 pm »
IT'S A 18MM

THOMPKININD.COM

7408-18 PLUG  9.76 IN STOCK
Logged
1.9 AAZ, CHD 5spd with Peloquin
KO4/KO3 Hybrid turbo
Giles Pump OHC
Complete Techtonics 2'5 S/S DP and Exhaust
Coilovers, MKII Pedal Swap,G60 BRAKES
MK1 JETTA DASH
675MM 16V radiator (MKII) PASSAT DUAL FAN
42K original miles , South African Front End
15x6 Le Casletts 195-45-15
Reply #7November 02, 2009, 07:22:33 pm

87octane

  • Guest
Re: what's the thread pitch of AAZ block turbo oil return banjo?
« Reply #7 on: November 02, 2009, 07:22:33 pm »
Huge thanks, GEE BEE.
Yikes, it's a $15 bolt with tax and shipping, if you can find a disti that'll sell only one.
Better than an empty hole in the side of the block spewing oil, seeing as I spent the day and a 1/2 case of engine degreaser scrubbing the chassis and driveline in preparation for stabbing the new 1.9 in.
Looks like the previous owners could not stop the various previous engine incarnations from spewing forth from every seam, every gasket.
These 1.9's sure do look regal (and really tall) fully dressed on an engine stand, makes me wonder how you vw guys can fit all that stuff under the hood without flopping it over at a 45 like the vanagon guys do.
I'm really hoping my front and rear 3rd member trade with Idaho delivers before I have to bury the front diff under franken one nine, cuz that b$tch is heavy...
Logged
Reply #8November 02, 2009, 09:16:04 pm

GEE-BEE

  • Veteran
  • Offline
  • ***
  • 1604
  • Personal Text
    1981 with South African front end ,42 k original
Re: what's the thread pitch of AAZ block turbo oil return banjo?
« Reply #8 on: November 02, 2009, 09:16:04 pm »
Yep time is money...

I used to have a aircraft hose shop at Long beach Airport, I did low psi 50 to 6000 opsi S/S braided teflon hoses

Some of the new stuff is Kevlar braided with Ti Fitting's

C17

B777 / B780 dreamliner

Are the two newer aircraft with those hose assy's

I now do custom silicone seal's and extrusion's
Logged
1.9 AAZ, CHD 5spd with Peloquin
KO4/KO3 Hybrid turbo
Giles Pump OHC
Complete Techtonics 2'5 S/S DP and Exhaust
Coilovers, MKII Pedal Swap,G60 BRAKES
MK1 JETTA DASH
675MM 16V radiator (MKII) PASSAT DUAL FAN
42K original miles , South African Front End
15x6 Le Casletts 195-45-15
Pages: [1]
« previous next »