« previous next »
Pages: [1]

Author Topic: Open wrench for injectors  (Read 1868 times)

October 03, 2009, 05:45:03 am

jbturgeon

  • Junior
  • Offline
  • **
  • 71
Open wrench for injectors
« on: October 03, 2009, 05:45:03 am »
Hi again, do you think i can unscrew the aaz injectors with an open wrench forcing at the top of the injector (just below the connection link made from rubber) or will i brake it into? What size of wrench?

Maybe a dumb question but prevention....

thx
Logged
AAZ for life!
Subaru Loyale 4x4
Reply #1October 03, 2009, 07:14:32 am

zukgod1

  • Veteran
  • Offline
  • ***
  • 2817
Re: Open wrench for injectors
« Reply #1 on: October 03, 2009, 07:14:32 am »
You need a socket. I dont doubt you can do it with a wrench but your really going to stress out the injector boss's that way and risk breaking.
Logged
dan

99 Golf TDI (now CNG powered) , 82 TD Caddy
Reply #2October 03, 2009, 07:20:00 pm

Baron VonZeppelin

  • Guest
Re: Open wrench for injectors
« Reply #2 on: October 03, 2009, 07:20:00 pm »
don't take the injector apart right there, take it loose at the base.

27mm
or
1 and 1/16 inch

socket

make sure your force is ALWAYS applied TOWARDS the head - NOT towards the radiator - whether loosening or tightening the injectors.

and don't accidentally forget that !  ;)
it could cost you another head.
Logged
Pages: [1]
« previous next »