Author Topic: 1.6 NA A/C Compressor Hex Key sizes (Read 2360 times)

ohc · « **on:** July 21, 2009, 07:16:30 pm »

Anyone know the two hex sizes for the pivot points holding the AC Compressor. Hopefully can save me a couple skates to the hardware store.

Thanks.

Quantum TD · « **Reply #1 on:** July 21, 2009, 11:08:08 pm »

Should be 8mm and 6mm IIRC.

Zulfiqar · « **Reply #2 on:** July 22, 2009, 12:02:46 am »

They are 10mm

jtanguay · « **Reply #3 on:** July 22, 2009, 01:03:58 pm »

if your just loosening to adjust the belt, don't completely back them out, because they are a pain to get back in (hard to line up...)

kane66 · « **Reply #4 on:** July 22, 2009, 02:48:14 pm »

you can buy a set of 12 hex sockets from harbor freight for 12.99 and it should have the sizes you need.

ohc · « **Reply #5 on:** July 25, 2009, 12:26:15 pm »

Mine are 6 and 10.
And to get timing things done, i don't need the AC compressor out, just the belt off, correct?

vanbcguy · « **Reply #6 on:** July 25, 2009, 12:39:37 pm »

Correct!