1.6 NA A/C Compressor Hex Key sizes - IDI Engine - VWDiesel.net The IDI, TDI, and mTDI source.

• 1.6 NA A/C Compressor Hex Key sizes by ohc on 21 Jul, 2009 19:16
• Anyone know the two hex sizes for the pivot points holding the AC Compressor. Hopefully can save me a couple skates to the hardware store.
  
  Thanks.
• #1 by Quantum TD on 21 Jul, 2009 23:08
• Should be 8mm and 6mm IIRC.
• #2 by Zulfiqar on 22 Jul, 2009 00:02
• They are 10mm
• #3 by jtanguay on 22 Jul, 2009 13:03
• if your just loosening to adjust the belt, don't completely back them out, because they are a pain to get back in (hard to line up...)
• #4 by kane66 on 22 Jul, 2009 14:48
• you can buy a set of 12 hex sockets from harbor freight for 12.99 and it should have the sizes you need.
• #5 by ohc on 25 Jul, 2009 12:26
• Mine are 6 and 10.
  And to get timing things done, i don't need the AC compressor out, just the belt off, correct?
• #6 by vanbcguy on 25 Jul, 2009 12:39
• Correct!