so im piecing my car together from random parts i have kicking around. the motor is going into a rabbit and when i tried to put the water pump and the accessory bracket that goes on over the water pump it seems like it is interfering with the injection pump/motor mount. do the mk1s have different accessory brackets or am i missing some sort of spacer?
and are there any tricks to bolting it up without taking off the fuel pump, i kinda forgot about those two up water pump bolts when i installed the pump and belts and the motor is all timed up....
-jared
I modified my bracket with a drill bit. I can remove it now with ease.
Yes they are different but they are compatible. There are a few different versions for both the mk1 and the mk2 as well
thats what i thought, ill play around with it tonight, good idea with the drill im def gonna do that ive always hated those stupid brackets....
-jared
ok now i figured it out. the motor mount that i had was only compatible with the alternator bracket that bolts to the bottom too water pump bolts, i looked under the hood of a new customers rabbit pickup and they had the setup i was looking for. this is cool because it is a simple setup but not cool cause i cant find the bracket....
-jared