Not really. I'm looking for one with the intake on the other side.
not hard to cut and weld the sides
you could port out a mk1, g60, or fox intake to d ports
Those PD-150 type manifolds are made with the intake on either side. Not sure which is which. My PD-150 entered on the passenger side same as the manifold shown in the picture above.
I think the PD Passat enters on the opposite side, so that's what I need.
Was that mine that you saw copied?
Yeah basically took the stock intake off, cut it in half, welded some plate around it, got a piece of aluminum plumbing and put it on top, welded up to taste. Works great, less filling.
If you can get one for $600 that's not a bad deal, probably 4 hours of fabrication work involved + materials.
Garry
I'll send you one over from the UK - they have the entry on the drivers side......
I'll send you one over from the UK - they have the entry on the drivers side......
Is that your drivers side, or my drivers side
?
If one of those were to fall into a box and be shipped around the world to the U.S, say in Maine, and end up on my front door, I do not think I would be very upset. I have a nice new AAZ head that would make it feel right at home.
jim
i have an ALH intake on my aaz head.
works great. You just have to cut the elbow off.