-
WTB: Student in need of 1.6 head
by
turbosuzi
on 26 Apr, 2009 15:16
-
I need to replace the head on my 1.6 and i am on a students budget and this is my school commuter and need to get it on the road asap. I need a 1.6 non turbo/solid lifter head with/cam,valves, and lifters.
-
#1
by
maxfax
on 26 Apr, 2009 15:25
-
11mm or 12mm head bolts?
-
#2
by
truckinwagen
on 26 Apr, 2009 15:41
-
I might be able to get you a 11mm one
if you need an 11mm one I could look and see if I have one worth bolting on and running.
-
#3
by
turbosuzi
on 26 Apr, 2009 16:02
-
11mm. Thanks how much do yo guys want?
-
#4
by
truckinwagen
on 26 Apr, 2009 16:07
-
I will have to go and look at what I have to see if there is one worthy of running.
I have lived the student life as well( studying for finals as we speak) and know how tight money can get.
make on offer, I haven't had a chance to go through all my stuff yet and decide what its worth yet(bought a bunch of stuff off an old guy recently)
what would you be willing to spend?
-
#5
by
turbosuzi
on 26 Apr, 2009 16:11
-
I bought a hydro/turbo head for my brother from tyler about a year and a half ago for 75.00 US so somewhere around there would do.
-
#6
by
truckinwagen
on 26 Apr, 2009 16:13
-
$75 plush shipping sounds good, let me look at my stash to see if I have one and I will get back to you.
-Owen
-
#7
by
turbosuzi
on 26 Apr, 2009 23:31
-
do you ahve any idea what shipping might be from AK to 93614 Coarsegold Ca? I will look at ups PM me your address so I can get an accurate price.
-
#8
by
truckinwagen
on 01 May, 2009 14:28
-
sorry I didnt get back to you sooner, but I looked through my heads, and I have 1 11mm 1.6 head, but it is really rough and needs a full rebuild and resurfacing before it could be used.
sorry to get you exited and then let you down.
-Owen
-
#9
by
SILVERNALE
on 02 May, 2009 07:23
-
hi I have 12mm head with less than 100 miles on it. bot new from partsplace in Mich. block is shot :cry: so parting out , new ip also
John
-
#10
by
ilikevwdiesel
on 02 May, 2009 18:45
-
I have an 11mm head that was just reconditioned at the machine shop, new guides, seals, valve job and resurface, cam is installed and valve clearance is set. I have 250 bucks into it and that's what you can have it for. It is in Crockett CA. near San Francisco.