Author Topic: WTB: Student in need of 1.6 head (Read 4834 times)

turbosuzi · « **on:** April 26, 2009, 03:16:52 pm »

I need to replace the head on my 1.6 and i am on a students budget and this is my school commuter and need to get it on the road asap. I need a 1.6 non turbo/solid lifter head with/cam,valves, and lifters.

maxfax · « **Reply #1 on:** April 26, 2009, 03:25:13 pm »

11mm or 12mm head bolts?

truckinwagen · « **Reply #2 on:** April 26, 2009, 03:41:21 pm »

I might be able to get you a 11mm one

if you need an 11mm one I could look and see if I have one worth bolting on and running.

turbosuzi · « **Reply #3 on:** April 26, 2009, 04:02:36 pm »

11mm. Thanks how much do yo guys want?

truckinwagen · « **Reply #4 on:** April 26, 2009, 04:07:46 pm »

I will have to go and look at what I have to see if there is one worthy of running.

I have lived the student life as well( studying for finals as we speak) and know how tight money can get.

make on offer, I haven't had a chance to go through all my stuff yet and decide what its worth yet(bought a bunch of stuff off an old guy recently)

what would you be willing to spend?

turbosuzi · « **Reply #5 on:** April 26, 2009, 04:11:46 pm »

I bought a hydro/turbo head for my brother from tyler about a year and a half ago for 75.00 US so somewhere around there would do.

truckinwagen · « **Reply #6 on:** April 26, 2009, 04:13:50 pm »

$75 plush shipping sounds good, let me look at my stash to see if I have one and I will get back to you.

-Owen

turbosuzi · « **Reply #7 on:** April 26, 2009, 11:31:57 pm »

do you ahve any idea what shipping might be from AK to 93614 Coarsegold Ca? I will look at ups PM me your address so I can get an accurate price.

truckinwagen · « **Reply #8 on:** May 01, 2009, 02:28:21 pm »

sorry I didnt get back to you sooner, but I looked through my heads, and I have 1 11mm 1.6 head, but it is really rough and needs a full rebuild and resurfacing before it could be used.

sorry to get you exited and then let you down.

-Owen

SILVERNALE · « **Reply #9 on:** May 02, 2009, 07:23:45 am »

hi I have 12mm head with less than 100 miles on it. bot new from partsplace in Mich. block is shot :cry: so parting out , new ip also
John

ilikevwdiesel · « **Reply #10 on:** May 02, 2009, 06:45:50 pm »

I have an 11mm head that was just reconditioned at the machine shop, new guides, seals, valve job and resurface, cam is installed and valve clearance is set. I have 250 bucks into it and that's what you can have it for. It is in Crockett CA. near San Francisco.

Author Topic: WTB: Student in need of 1.6 head (Read 4834 times)

turbosuzi

turbosuzi

turbosuzi

turbosuzi