Author Topic: WTB: clutch master cylinder (Read 5255 times)

jtanguay · « **on:** March 12, 2009, 10:14:08 am »

does anyone have a good used one? $120 for a brand new one is a bit much... should be mk3 style. i'm going to try a different way of hooking it up as well. don't laugh, but i'm going to use the clutch cable to actuate the rod... ok you can laugh :lol:

thanks

Spulen81 · « **Reply #1 on:** March 13, 2009, 06:20:08 am »

I've got one from a MK3 TDI. I have the line that goes to the slave too if you need that. $30 for both plus whatever shipping costs.

blkboostedtruck · « **Reply #2 on:** March 13, 2009, 08:29:55 am »

i think i have one from a corrado if it's the same?
Duane

jtanguay · « **Reply #3 on:** March 13, 2009, 09:18:24 am »

Quote from: "Spulen81"

I've got one from a MK3 TDI. I have the line that goes to the slave too if you need that. $30 for both plus whatever shipping costs.

what shape is the master cyl in? i'll most likely buy that.

Quote from: "blkboostedtruck"

i think i have one from a corrado if it's the same?
Duane

do you have the line as well? or does standard brake line work? you don't happen to have the axles from a corrado mk2 do you? :lol:

blkboostedtruck · « **Reply #4 on:** March 13, 2009, 09:30:02 am »

Quote from: "jtanguay"

Quote from: "Spulen81"
I've got one from a MK3 TDI. I have the line that goes to the slave too if you need that. $30 for both plus whatever shipping costs.

what shape is the master cyl in? i'll most likely buy that.

Quote from: "blkboostedtruck"
i think i have one from a corrado if it's the same?
Duane

do you have the line as well? or does standard brake line work? you don't happen to have the axles from a corrado mk2 do you? :lol:

no i don't have the line! i do have the axels from the corrado some where!
why you want them?
Duane

jtanguay · « **Reply #5 on:** March 13, 2009, 09:45:15 am »

Quote from: "blkboostedtruck"

Quote from: "jtanguay"
Quote from: "Spulen81"
I've got one from a MK3 TDI. I have the line that goes to the slave too if you need that. $30 for both plus whatever shipping costs.

what shape is the master cyl in? i'll most likely buy that.

Quote from: "blkboostedtruck"
i think i have one from a corrado if it's the same?
Duane

do you have the line as well? or does standard brake line work? you don't happen to have the axles from a corrado mk2 do you? :lol:

no i don't have the line! i do have the axels from the corrado some where!
why you want them?
Duane

yes i need corrado axles! are they in good shape?

i'm also curious if a standard brake fitting will fit the corrado clutch master cyl, or if i need to buy a special line?
thanks

Spulen81 · « **Reply #6 on:** March 13, 2009, 09:56:07 am »

It came from a working car that was packed in the rear. It came from a more southern car too so its not real rusty.

A regular brake line would probably work but there is a hose too. The line I have has the hardline and hose.
Need anything else? I have a rado pedal cluster and a MK3 shifter box and cables.

blkboostedtruck · « **Reply #7 on:** March 13, 2009, 10:17:33 am »

Quote from: "jtanguay"

Quote from: "blkboostedtruck"
Quote from: "jtanguay"
Quote from: "Spulen81"
I've got one from a MK3 TDI. I have the line that goes to the slave too if you need that. $30 for both plus whatever shipping costs.

what shape is the master cyl in? i'll most likely buy that.

Quote from: "blkboostedtruck"
i think i have one from a corrado if it's the same?
Duane

do you have the line as well? or does standard brake line work? you don't happen to have the axles from a corrado mk2 do you? :lol:

no i don't have the line! i do have the axels from the corrado some where!
why you want them?
Duane

yes i need corrado axles! are they in good shape?

i'm also curious if a standard brake fitting will fit the corrado clutch master cyl, or if i need to buy a special line?
thanks

i'll look for them axels i'm pretty sure their decent! the line for the cylinder is just common brake line bubble type flared ends!
Duane

jtanguay · « **Reply #8 on:** March 13, 2009, 10:26:59 am »

Quote from: "blkboostedtruck"

i'll look for them axels i'm pretty sure their decent! the line for the cylinder is just common brake line bubble type flared ends!
Duane

yesss! thats what i want to hear :lol: i need to get this tranny installed on the cheap :wink:

blkboostedtruck · « **Reply #9 on:** March 13, 2009, 07:37:38 pm »

i looked for the axels ! bad news tho! my buddy came by yesterday and got the pair! and i only see a passenger side in my garage! i thought i had more but i guess i don't but just that passenger but it's in good shape!
sorry JT! let me know if you still want the master slave or this p.s. axle?
Duane

jtanguay · « **Reply #10 on:** March 13, 2009, 07:54:46 pm »

Quote from: "blkboostedtruck"

i looked for the axels ! bad news tho! my buddy came by yesterday and got the pair! and i only see a passenger side in my garage! i thought i had more but i guess i don't but just that passenger but it's in good shape!
sorry JT! let me know if you still want the master slave or this p.s. axle?
Duane

oh well thanks for looking! i'm going to hit up the 'tex and see what i can find. most ppl will want to sell them as a set, but we'll see! shipping just the master might be a bit of a pain (shipping & customs, etc) so i'll try local first.