Author Topic: better clutch (Read 2750 times)

dgcrsn · « **on:** March 11, 2009, 11:28:09 am »

Hey guys i have a 95 1.9td and my clutch is just about to go. I want to put a better clutch in it so it can take some abuse and more power...i was wondering what u guys suggested and where i could get one that is better than stock??? Thanks

1slowvw · « **Reply #1 on:** March 11, 2009, 11:31:51 am »

If you are not going crazy power or severe abuse, I would look into going with a 16v pressure plate and a ACT street disc.

1SlowVW

g-spec · « **Reply #2 on:** March 12, 2009, 10:46:13 am »

Im running a 16v pressure plate and a 8v clutch disk....its holding great. I have a 1.9AAZ with a t3 and I had it spike at over 30psi and clutch didnt slip.

1slowvw · « **Reply #3 on:** March 12, 2009, 11:59:00 am »

Quote from: "g-spec"

Im running a 16v pressure plate and a 8v clutch disk....its holding great. I have a 1.9AAZ with a t3 and I had it spike at over 30psi and clutch didnt slip.

A few of my friends run with just the 16v PP and a new disc, and it works fine for them, I have just chosen to go overkill with mine because I kept burning them out after a couple hundred kms.

1SlowVW

stewardc · « **Reply #4 on:** March 12, 2009, 01:22:23 pm »

My AAZ runs a full ACT setup.

rabbit GTI/GTD · « **Reply #5 on:** March 20, 2009, 10:45:26 am »

hey stewardc, where did you buy your clutch from and how much, use stock aaz flywheel??? hey cousin dgcrsn, let me know what you get. should come up and help me work on my caddy soon.

8v-of-fury · « **Reply #6 on:** March 20, 2009, 11:37:41 am »

anyone else find it cool that everyone that posted is Canadian?

Thought I'd throw that in there

rabbit GTI/GTD · « **Reply #7 on:** March 20, 2009, 12:01:56 pm »

lol, yah, cool stuff, lol.

stewardc · « **Reply #8 on:** March 20, 2009, 12:26:53 pm »

Quote from: "rabbit GTI/GTD"

hey stewardc, where did you buy your clutch from and how much, use stock aaz flywheel??? hey cousin dgcrsn, let me know what you get. should come up and help me work on my caddy soon.

I bought mine from a local speed shop, don't remember how much. It was for the stock 210mm flywheel.

zozep · « **Reply #9 on:** March 25, 2009, 11:41:18 am »

Lanark... I grew up in lanark...

That's all. :roll:

rallydiesel · « **Reply #10 on:** March 25, 2009, 12:16:17 pm »

Anybody have any recommendations for a better clutch and flywheel for a 1.6 with the 020? I'd like to switch to a conventional flywheel (not the wonky backwards stock set-up).

*canadian content still going*

jtanguay · « **Reply #11 on:** March 25, 2009, 12:57:38 pm »

Quote from: "rallydiesel"

Anybody have any recommendations for a better clutch and flywheel for a 1.6 with the 020? I'd like to switch to a conventional flywheel (not the wonky backwards stock set-up).

*canadian content still going*

i'll be selling mine sometime around this summer. kevlar clutch with stage 1 pressure plate and lightened flywheel. kevlar lasts a really long time.

Author Topic: better clutch (Read 2750 times)

1slowvw

1slowvw

stewardc

8v-of-fury

stewardc