-
better clutch
by
dgcrsn
on 11 Mar, 2009 11:28
-
Hey guys i have a 95 1.9td and my clutch is just about to go. I want to put a better clutch in it so it can take some abuse and more power...i was wondering what u guys suggested and where i could get one that is better than stock??? Thanks
-
#1
by
1slowvw
on 11 Mar, 2009 11:31
-
If you are not going crazy power or severe abuse, I would look into going with a 16v pressure plate and a ACT street disc.
1SlowVW
-
#2
by
g-spec
on 12 Mar, 2009 10:46
-
Im running a 16v pressure plate and a 8v clutch disk....its holding great. I have a 1.9AAZ with a t3 and I had it spike at over 30psi and clutch didnt slip.
-
#3
by
1slowvw
on 12 Mar, 2009 11:59
-
Im running a 16v pressure plate and a 8v clutch disk....its holding great. I have a 1.9AAZ with a t3 and I had it spike at over 30psi and clutch didnt slip.
A few of my friends run with just the 16v PP and a new disc, and it works fine for them, I have just chosen to go overkill with mine because I kept burning them out after a couple hundred kms.
1SlowVW
-
#4
by
stewardc
on 12 Mar, 2009 13:22
-
My AAZ runs a full ACT setup.
-
#5
by
rabbit GTI/GTD
on 20 Mar, 2009 10:45
-
hey stewardc, where did you buy your clutch from and how much, use stock aaz flywheel??? hey cousin dgcrsn, let me know what you get. should come up and help me work on my caddy soon.
-
#6
by
8v-of-fury
on 20 Mar, 2009 11:37
-
anyone else find it cool that everyone that posted is Canadian?
Thought I'd throw that in there
-
#7
by
rabbit GTI/GTD
on 20 Mar, 2009 12:01
-
lol, yah, cool stuff, lol.
-
#8
by
stewardc
on 20 Mar, 2009 12:26
-
hey stewardc, where did you buy your clutch from and how much, use stock aaz flywheel??? hey cousin dgcrsn, let me know what you get. should come up and help me work on my caddy soon.
I bought mine from a local speed shop, don't remember how much. It was for the stock 210mm flywheel.
-
#9
by
zozep
on 25 Mar, 2009 11:41
-
Lanark... I grew up in lanark...
That's all. :roll:
-
#10
by
rallydiesel
on 25 Mar, 2009 12:16
-
Anybody have any recommendations for a better clutch and flywheel for a 1.6 with the 020? I'd like to switch to a conventional flywheel (not the wonky backwards stock set-up).
*canadian content still going*
-
#11
by
jtanguay
on 25 Mar, 2009 12:57
-
Anybody have any recommendations for a better clutch and flywheel for a 1.6 with the 020? I'd like to switch to a conventional flywheel (not the wonky backwards stock set-up).
*canadian content still going*
i'll be selling mine sometime around this summer. kevlar clutch with stage 1 pressure plate and lightened flywheel. kevlar lasts a really long time.