-
exhaust?????? by joe_gtd on 22 Jan, 2009 12:43
-
hello again guys, getting quite good at this posting bussiness lol
im after fabbing up a straight through exhaust system or my gtd, and was wonderig how i would do it? for want off a better word1
i cant quite get my head round how you would start the 2.5 inch pipe???
ideas on a postcard lol
cheers guys. -
#1 by regcheeseman on 22 Jan, 2009 13:41
-
Cut the flange off the original, grind it out and weld from there - that's how I did my first one.
you'll need a 180 bend and a 90 bend and a bit of straight.........that's if it's going in a a1 chassis. -
#2 by ein bora on 22 Jan, 2009 13:59
-
Quote from: "regcheeseman"
Cut the flange off the original, grind it out and weld from there - that's how I did my first one.
you'll need a 180 bend and a 90 bend and a bit of straight.........that's if it's going in a a1 chassis.
How about for a mk3 - anybody know whats all needed?? -
#3 by DYNOMAX on 23 Jan, 2009 19:31
-
I have made a small run with flanges to VW Diesel 1.6TD 1.9TD
Parts to run dual turbo will also be available.
World wide shipping no problemas.
//Anton
-
#4 by 8v-of-fury on 28 Jan, 2009 19:22
-
Quote from: "regcheeseman"
you'll need a 180 bend
Hehe, a 180 degree bend? thats a straight line! lol just thought i point that out.. lmao -
#5 by Smokey Eddy on 28 Jan, 2009 20:52
-
oh sweet jesus new turbo's are sexy
-
#6 by Dirtrag2 on 29 Jan, 2009 06:58
-
Quote from: "ein bora"
How about for a mk3 - anybody know whats all needed??
same as before but add a flex :wink: -
#7 by Vincent Waldon on 29 Jan, 2009 09:09
-
Here's a good example of a fab, including thoughts on where to get the parts:
http://vwdiesel.net/phpBB/viewtopic.php?t=14003&postdays=0&postorder=asc&start=0&sid=a05b000bffbff6aa91fdd0a5b21d2cbd -
#8 by arb on 29 Jan, 2009 12:25
-
Quote from: "Vincent Waldon"
Here's a good example of a fab, including thoughts on where to get the parts:
http://vwdiesel.net/phpBB/viewtopic.php?t=14003&postdays=0&postorder=asc&start=0&sid=a05b000bffbff6aa91fdd0a5b21d2cbd
Yes, a work of art ! I used a 4" table belt sander to make my flange flat when I welded it to the S.S. 90 degree. -
#9 by dillenger1 on 29 Jan, 2009 15:20
-
Quote from: "Smokey Eddy"
oh sweet jesus new turbo's are sexy
AAAAAAHHHHmen! -
#10 by gigaz2 on 29 Jan, 2009 17:06
-
Quote from: "DYNOMAX"
I have made a small run with flanges to VW Diesel 1.6TD 1.9TD
Parts to run dual turbo will also be available.
World wide shipping no problemas.
//Anton
how much for a piece or two to Portugal?