Author Topic: 6-speed tranny question (Read 5759 times)

jtanguay · « **Reply #15 on:** January 24, 2009, 02:16:06 pm »

Quote from: "foxracer1"

So will those gear sets fit an 020?

as far as i know they will.

nogama3 · « **Reply #16 on:** January 27, 2009, 06:35:53 am »

just how much work is involved to make it fit?

jtanguay · « **Reply #17 on:** January 27, 2009, 06:50:22 am »

Quote from: "nogama3"

just how much work is involved to make it fit?

not much... it can actually be done while in the car. just follow the online instructions. the best way to get the gears out is not with a puller, but to actually heat them up. then they will just slide right off. i seem to recall that you can actually break something inside if you use a puller... maybe the gear itself??? :shock:

CoolAirVw · « **Reply #18 on:** February 13, 2009, 11:09:46 am »

Quote from: "foxracer1"

So will those gear sets fit an 020?

If your asking about the gear sets on kermatdi and tdiparts... they are for a 02J in the a4 platform and will not fit a 020.

jtanguay · « **Reply #19 on:** February 13, 2009, 12:42:04 pm »

http://www.boraparts.com/catalog/product_info.php?products_id=70

that gearset should fit on an 020.

CoolAirVw · « **Reply #20 on:** April 06, 2009, 06:52:55 am »

Quote from: "jtanguay"

http://www.boraparts.com/catalog/product_info.php?products_id=70

that gearset should fit on an 020.

That link goes to a gearset for a o2j. I guess it does say "fits 96 and newer and some older" (paraphrase)

Are you saying that some 020 and 02j's have interchangeable gears?

arb · « **Reply #21 on:** April 06, 2009, 09:12:56 am »

If you can squeeze taller tires on your car, you'll also drop your rpm...

ein bora · « **Reply #22 on:** April 06, 2009, 02:37:55 pm »

Quote from: arb

If you can squeeze taller tires on your car, you'll also drop your rpm...[/quote

Actually I thought of that - I'm running 195-60x14" which is a 23.2" tall tire now, I think it could easily handle a 195-65x14" which is 24" tall or maybe even a 195-70x14" which is 24.7" tall, both are the same width as the 195-60x14's. Expensive gamble though - fitment wise.

hamradio · « **Reply #23 on:** April 06, 2009, 03:47:10 pm »

How fast are you cruising at? Why not use a .71 out of a lot of old diesel 020's?

I don't have a tach, but the .71 in my rabbit is actually a little too tall for my taste.

FYI, early dodge omni 4sp's were vw transmissions with a tall r&p, I think.

jtanguay · « **Reply #24 on:** April 06, 2009, 04:53:43 pm »

i'm installing a CTN in my mk2 jetta. it has the tallest r&p available, but the 5th gear can still go lower

. i'll be bolting the clutch master cyl to the firewall and then putting a rod from the clutch pedal to it with the right angle. way cheaper than doing the cable conversion, plus i kinda like hydraulic :lol:

also going cable clutch will be cool! 2100 rpm is nearly 60 mph.