show me pics of your k24/t3 on the 1.9 - IDI Engine - VWDiesel.net The IDI, TDI, and mTDI source.

• show me pics of your k24/t3 on the 1.9 by Baixo on 20 Jan, 2009 06:24
• im asking cause i am wondering what was done for the oil feed line?
  
  any pics for referance would be greatly apreciated...
  
  Matt
• #1 by g-spec on 20 Jan, 2009 09:48
• My oil feed line didnt require any modification....it just bolted up to the new turbo. I have a t3 on a AAZ. Its the oil return line that does not fit. I have a custom stainless one 3/4inch ID from the turbo to the pan. Stock location is blocked.
• #2 by jtanguay on 20 Jan, 2009 10:52
• you can take the AAZ return line and weld it to the K24/T3 line.  you just need the banjo piece for the AAZ, and most of the return from the K24/T3.  alternatively, you might be able to use a 1.6TD pan and return it that way (with the 1.6TD return line), but i think it might be off by half an inch due to the 1.9 block being taller.
• #3 by bert on 20 Jan, 2009 11:47
• heres mine
  AAZ with T3
  
  
  
  
  Bert
• #4 by Baixo on 20 Jan, 2009 12:30
• Quote from: "g-spec"

  My oil feed line didnt require any modification....it just bolted up to the new turbo. I have a t3 on a AAZ. Its the oil return line that does not fit. I have a custom stainless one 3/4inch ID from the turbo to the pan. Stock location is blocked.

  
  
  i gtd that im going to be swaping in a na 1.9 and using all the gtd stuff on that.
  
  i was told about the oil feed line...i figured that i would have to do something there.
  
  i was also told that the 1.6 oil filter housing is not transferable to the 1.9...
  
  did you guys use the k24/t3 oil feed line on the 1.9 oil filter housing?
• #5 by stewardc on 21 Jan, 2009 05:06
• A hose making shop made me a nice new stainless braided feedline for about $30. I had just used a slightly bent 1.6 steel line before that.
• #6 by jtanguay on 21 Jan, 2009 19:43
• Quote from: "Baixo"

  Quote from: "g-spec"

  My oil feed line didnt require any modification....it just bolted up to the new turbo. I have a t3 on a AAZ. Its the oil return line that does not fit. I have a custom stainless one 3/4inch ID from the turbo to the pan. Stock location is blocked.

  
  
  i gtd that im going to be swaping in a na 1.9 and using all the gtd stuff on that.
  
  i was told about the oil feed line...i figured that i would have to do something there.
  
  i was also told that the 1.6 oil filter housing is not transferable to the 1.9...
  
  did you guys use the k24/t3 oil feed line on the 1.9 oil filter housing?

  
  
  you nee the K24/T3 oil line fitting from the 1.6 housing.  thread that into the 1.9 filter housing.  the line feed line will fit.