93 Jetta Blower Motor Problem - Troubleshooting - VWDiesel.net The IDI, TDI, and mTDI source.

• 93 Jetta Blower Motor Problem by Kantdrive55 on 22 Dec, 2008 15:54
• My fan level 1 and 3 havent worked for a while.  2 and 4 always have until today.  Could this be a switch problem?  Thanks
• #1 by jtanguay on 22 Dec, 2008 17:07
• Quote from: "Kantdrive55"

  My fan level 1 and 3 havent worked for a while.  2 and 4 always have until today.  Could this be a switch problem?  Thanks

  
  
  definitely.
• #2 by Kantdrive55 on 31 Dec, 2008 09:26
• Will the controller that is for AC work on a vehicle that doesnt have ac?
• #3 by Kantdrive55 on 01 Jan, 2009 21:47
• Anybody know if the AC heater controls will work on non ac car?
• #4 by andy2 on 02 Jan, 2009 07:59
• The controls for A/C cars are vaccum operated and on non A/C cars they are cable operated.I'm pretty sure everything including the switch is different.I havn't seen all fan speeds quit working before usually Hi speed works when the rest don't.Could possibly be the motor or a fuse.If the switch contacts are worn you should be able to wiggle the swich around to get contact.I'm not sure if there cars have a fan motor resitor control for the fan speeds???
• #5 by Kantdrive55 on 04 Jan, 2009 11:04
• Thanks for the info.  I can only get 4 to work.  The blower works fine.  I just have to be able to control it now.  I have to wiggle the switch to just the right spot to get it to work, so I am pretty sure it is the switch.