Looking for pictures of the Passenger Performance 1.6 intake - page 1 - General - VWDiesel.net The IDI, TDI, and mTDI source.

• Looking for pictures of the Passenger Performance 1.6 intake by greatpenguin on 20 Dec, 2008 11:38
• Just like it states, I cant find pics of it anywhere anymore.  Need pics of the 1.6l td intake manifold that they use to sell.  If you have one and could take pics that would be great!
• #1 by cyrus #1 on 20 Dec, 2008 14:26
• It is a sexy piece!  I'm going to build one something like it for my project.
  
  http://www.vwdiesel.net/phpBB/viewtopic.php?t=7676&highlight=
• #2 by greatpenguin on 20 Dec, 2008 16:10
• I am going to try to have someone make one for me, thats the reason for the pics.
  
  The internals on these, is everything completely hollow until it hits the runners on the stock intake?  If thats so, this doesn't seem to hard for someone to make.
  
  If someone has one that can take a pic of the inside it would be great!
• #3 by cyrus #1 on 20 Dec, 2008 16:22
• If I remember correctly, there was nothing fancy about the inside.  It wasn't dual plenum and there were no baffles or anything.
• #4 by subsonic on 20 Dec, 2008 16:44
• I remember it saying dual plenum.  I remember asking if that could be explained.
• #5 by 935racer on 21 Dec, 2008 12:51
• There is a calculated narrow slot that divides the two plenums, no internal baffles. Definitely two plenums, but not quite as simple as just putting the two together, took a while to figure out how to get the best air distribution across the ports under pressure.
• #6 by greatpenguin on 21 Dec, 2008 17:15
• Quote from: "935racer"

  There is a calculated narrow slot that divides the two plenums, no internal baffles. Definitely two plenums, but not quite as simple as just putting the two together, took a while to figure out how to get the best air distribution across the ports under pressure.

  
  
  Anyway you would like to show up pics, or better explain as to what you did.  Since you are no longer making these for us you wouldn't be losing money, and it would be helping the community...      
• #7 by 53 willys on 22 Dec, 2008 08:56
• Quote from: "greatpenguin"

  Quote from: "935racer"

  There is a calculated narrow slot that divides the two plenums, no internal baffles. Definitely two plenums, but not quite as simple as just putting the two together, took a while to figure out how to get the best air distribution across the ports under pressure.

  
  
  Anyway you would like to show up pics, or better explain as to what you did.  Since you are no longer making these for us you wouldn't be losing money, and it would be helping the community...      

  
  yeah!!!!!  that would be SWEET!!!!
  I would not ask if you where still making them...but if you have quit please do share any pics or info you got...thanks
• #8 by greatpenguin on 02 Jan, 2009 19:28
• 
• #9 by RabbitJockey on 03 Jan, 2009 10:32
• i like my sdi intake
• #10 by 53 willys on 03 Jan, 2009 20:25
• Quote from: "Trev0rbr"

  i like my sdi intake

  
  
  whats a SDI??
• #11 by cyrus #1 on 03 Jan, 2009 22:21
• Unless I'm mistaken, I believe an SDI is a naturally aspirated direct injection engine.  I have no idea what the intake looks like though.  Can you post some pics?
• #12 by jtanguay on 03 Jan, 2009 23:56
• Quote from: "cyrus #1"

  Unless I'm mistaken, I believe an SDI is a naturally aspirated direct injection engine.  I have no idea what the intake looks like though.  Can you post some pics?

  
  
  suction diesel injection.  pretty much a fancy way of saying naturally aspirated diesel engine (as it should be implied that all diesel engines are injection)
  
  the n/a manifold has some long, equal length runners.  it does pose some mounting issues as it gets in the way of the turbo...
• #13 by Smokey Eddy on 04 Jan, 2009 02:05
• handedyourhat is selling these right now for 500 cdn (well similar)
• #14 by 935racer on 04 Jan, 2009 11:59
• I am actually still making these, just need to find a canadian or american distributor. The problem is I don't have time to take so many orders and individual shipping, so I need to find a retailer to buy 5 at a time or more.