« previous next »
Pages: 1 2 [3]

Author Topic: pump mods  (Read 24024 times)

Reply #30December 23, 2007, 09:22:27 pm

dillenger1

  • Veteran
  • Offline
  • ***
  • 777
pump mods
« Reply #30 on: December 23, 2007, 09:22:27 pm »
fsp...are you saying that you preloaded the spring or completely took it out and replaced it with the washer?
Logged
Cummins 4bta- 85 dodge prospector short bed
28 mpg!!and i can pull down a house!
1.6td in toyota pickup
10mm head ,t3 intercooled.
Reply #31December 23, 2007, 09:49:41 pm

jimfoo

  • Veteran
  • Offline
  • ***
  • 2110
    • http://www.66rover.com
pump mods
« Reply #31 on: December 23, 2007, 09:49:41 pm »
He took out the intermediate spring and put a washer in it's place. This is not really recommended for a street car as it causes weird driveability problems. If you do anything, shim the main spring and leave the intermediate alone. There are other posts about this.
Logged
Jim
1966 Land-Rover 88" with 1.9 1Z which has been transformed to an M-TDI
TFO35 mechanically controlled VNT, IC , and 2.5" exhaust.
Driven daily
Pages: 1 2 [3]
« previous next »