Author Topic: show me pics of your k24/t3 on the 1.9 (Read 3758 times)

Baixo · « **on:** January 20, 2009, 06:24:44 am »

im asking cause i am wondering what was done for the oil feed line?

any pics for referance would be greatly apreciated...

Matt

g-spec · « **Reply #1 on:** January 20, 2009, 09:48:25 am »

My oil feed line didnt require any modification....it just bolted up to the new turbo. I have a t3 on a AAZ. Its the oil return line that does not fit. I have a custom stainless one 3/4inch ID from the turbo to the pan. Stock location is blocked.

jtanguay · « **Reply #2 on:** January 20, 2009, 10:52:09 am »

you can take the AAZ return line and weld it to the K24/T3 line. you just need the banjo piece for the AAZ, and most of the return from the K24/T3. alternatively, you might be able to use a 1.6TD pan and return it that way (with the 1.6TD return line), but i think it might be off by half an inch due to the 1.9 block being taller.

bert · « **Reply #3 on:** January 20, 2009, 11:47:07 am »

heres mine
AAZ with T3

Bert

Baixo · « **Reply #4 on:** January 20, 2009, 12:30:19 pm »

Quote from: "g-spec"

My oil feed line didnt require any modification....it just bolted up to the new turbo. I have a t3 on a AAZ. Its the oil return line that does not fit. I have a custom stainless one 3/4inch ID from the turbo to the pan. Stock location is blocked.

i gtd that im going to be swaping in a na 1.9 and using all the gtd stuff on that.

i was told about the oil feed line...i figured that i would have to do something there.

i was also told that the 1.6 oil filter housing is not transferable to the 1.9...

did you guys use the k24/t3 oil feed line on the 1.9 oil filter housing?

stewardc · « **Reply #5 on:** January 21, 2009, 05:06:20 am »

A hose making shop made me a nice new stainless braided feedline for about $30. I had just used a slightly bent 1.6 steel line before that.

jtanguay · « **Reply #6 on:** January 21, 2009, 07:43:29 pm »

Quote from: "Baixo"

Quote from: "g-spec"
My oil feed line didnt require any modification....it just bolted up to the new turbo. I have a t3 on a AAZ. Its the oil return line that does not fit. I have a custom stainless one 3/4inch ID from the turbo to the pan. Stock location is blocked.

i gtd that im going to be swaping in a na 1.9 and using all the gtd stuff on that.

i was told about the oil feed line...i figured that i would have to do something there.

i was also told that the 1.6 oil filter housing is not transferable to the 1.9...

did you guys use the k24/t3 oil feed line on the 1.9 oil filter housing?

you nee the K24/T3 oil line fitting from the 1.6 housing. thread that into the 1.9 filter housing. the line feed line will fit.

Author Topic: show me pics of your k24/t3 on the 1.9 (Read 3758 times)

Baixo

Baixo

stewardc