what do ya think about this breather box?

[blkboostedtruck]

what do you guys think about this style of breather box? it come in 3 colors blue, red, silver there are smaller cylinder style this company has but i like the looks of this one and the price is not bad either!
Duane



http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWAX:IT&item=110311313462

[zukgod1]

I saw that one, looks nice.

This is the one I have been looking at and recommended to 53 willeys, he bought one already as well and it was like $21.50 shipped.

53 willys put larger nipples on it though, comes with like 3/8 hose and as the one on the valve cover is closer to 1/2 or 5/8 the 3/8 hose may not flow enough.


http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWAX:IT&item=170261414507

[blkboostedtruck]

it looks like the one i been eye balling comes with bigger hose 15mm so it should be better? you know what they say bigger is better?
Duane

[zukgod1]

Looks a bit nicer as well however!!!!
Mark just put larger nipples on his and I'm guessing ti didn't cost him an additional $16. to do so.
Looks like they are about the same size as well.

[53 willys]

here is mine...like dan said it has been modified for 5/8" hose....
seems to work great so far... and the price is right....I looked at the box style ones..I went with the round one cause it was smaller and cheaper.
not the best pic..but you get the idea..

[blkboostedtruck]

what did you use on the valve cover? you got a close up of that?
Duane

[zukgod1]

Its a weird G60

There is a close up on this page.
http://vwdiesel.net/phpBB/viewtopic.php?t=16090&postdays=0&postorder=asc&start=45

[Smokey Eddy]

sorry for my n00biness. What is the breather for exactly? I know that lots of oil vapour comes out of it if you have bad blow by and it feeds it into the intake (for oiling of the turbo? I don't know... maybe just somewhere for it to go?)

[zukgod1]

sorry for my n00biness. What is the breather for exactly? I know that lots of oil vapour comes out of it if you have bad blow by and it feeds it into the intake (for oiling of the turbo? I don't know... maybe just somewhere for it to go?)

Essentially it filters the air coming out of the crankcase (blow by) and lets the oil settle out of it condensing in the catcher can then allowing the air to breathe out. Thus no oil splattering out the crank case breather tube.

[blkboostedtruck]

Its a weird G60

There is a close up on this page.
http://vwdiesel.net/phpBB/viewtopic.php?t=16090&postdays=0&postorder=asc&start=45

not the VC! the CCV that he has his hose running to on the VC i can't make out the thing he's got on there? before it was a filter now it's something else!
and thats what i want to see!
Duane

[53 willys]

what did you use on the valve cover? you got a close up of that?
Duane

this is what I wanted to get and what I would recommend...but the local store was out of them..  and I did not want to wait for the mail order..

http://shop.oreillyauto.com/ProductDetail.aspx?MfrCode=SCT&MfrPartNumber=42795&CategoryCode=5001


So I bought this and moded it...I just bought some brass nipples to make the connections...you dont want to run the PCV one I bought with the PCV vale...its WAAAAY to restrictive for our diesels...


http://shop.oreillyauto.com/ProductDetail.aspx?MfrCode=SCT&MfrPartNumber=42845&CategoryCode=5001

[blkboostedtruck]

both those link just show main page and not the item!
Duane

[53 willys]

both those link just show main page and not the item!
Duane

oop sorry...
search this part number for the first pic..
42795

and this for the second..
42845
that should bring them up...

[jtanguay]

wtf how are they selling these kits for so cheap???!!!

and why not have the drain go right back into the oil sump???   this would be a cheap fix for anyone with bad blowby...  :wink:

[blkboostedtruck]

i don't know why thier so cheap? but i think a fitting tapped near the bottom and a hose going to the block would take care of the oil?
Duane