-
1.6td camshaft needed by ObscuredByClouds on 09 Nov, 2008 16:20
-
The end where the timing lock is is 98% broken off
I need another camshaft where that end is intact. Let me know what you have, PM me.
-
#1 by burn_your_money on 16 Nov, 2008 15:52
-
mechanical or hydraulic?
-
#2 by jtanguay on 16 Nov, 2008 17:28
-
http://cgi.ebay.com/ebaymotors/Parts-Accessories_Car-Truck-Parts-Accessories__Vw-Diesel-Cylinder-Head-Volkswagon_W0QQitemZ220310858183QQddnZPartsQ20Q26Q20AccessoriesQQadiZ2865QQddiZ2811QQadnZCarQ20Q26Q20TruckQ20PartsQ20Q26Q20AccessoriesQQcmdZViewItemQQptZMotors_Car_Truck_Parts_Accessories?hash=item220310858183&_trksid=p4506.c0.m245&_trkparms=72%3A543%7C65%3A12%7C39%3A1%7C240%3A1318
but just for the cam... hmmm! i wonder what he means by "Oil galley is tapped, cleaned and plugged."
is that a converted head to mechanical??? so if you remove that plug it can be used on a hydraulic??? -
#3 by shortysclimbin on 16 Nov, 2008 20:26
-
I have one kicking around in my storage in vt.. But I am in VA... When do you need it buy?
-
#4 by fuslit on 19 Nov, 2008 12:55
-
If you haven't found one yet, I'm 95% sure I do. Let me check when I get home tonight.
-Todd -
#5 by Jet A on 19 Nov, 2008 15:54
-
I have a mechanical laying on the shelf, but no hydro. But frankly i thought they were the same??
Shows what i know.... :oops: -
#6 by fuslit on 19 Nov, 2008 20:35
-
well, I was right, I have one, but...
When I pulled it I found that it's got some grooves in it and some surface rust on the lobes. Not sure if you are interested in it or not.
more pics here
http://fuslit.org/photo_gallery/index.php?album=misc%2Fcar%2Ffor_sale%2F20081119td-camshaft/ -
#7 by Dakotakid on 19 Nov, 2008 21:05
-
Ya, ya....running a mechanical is fine. I'm doing it in this newly rebuilt hydro engine that just finally started breathing this weekend.
I always plastigage to see how things are first. -
#8 by Jet A on 21 Nov, 2008 16:37
-
Quote from: "Dakotakid"
Ya, ya....running a mechanical is fine. I'm doing it in this newly rebuilt hydro engine that just finally started breathing this weekend.
I always plastigage to see how things are first.
where the f does this post fit in? -
#9 by Dakotakid on 21 Nov, 2008 21:51
-
Mechanical cam in hydro head is just fine. No problems.