Author Topic: AAZ into mk1 question (Read 1950 times)

ilikevwdiesel · « **on:** November 08, 2008, 04:46:32 pm »

Do the large pin AAZ injection pumps bolt right onto the 1.6 injection pump/engine mount bracket found on mk 1 cars? That is if you are installing an AAZ into a rabbit does the mk 1 bracket work fine on the AAZ? :?

ilikevwdiesel · « **Reply #1 on:** November 08, 2008, 05:45:28 pm »

The reason I ask is I just installed a 97 AAZ into my Caddy, the pump has the pulley held on by 3 bolts. Now I'm having trouble with the IP. I can get a good deal on the earlier AAZ pump that uses the big pin to lock it but I don't know the deal with this setup as far as the bracket and the timing cover set. I modded the AAZ cover and used a gasser mount on the present setup, but how does it all work out on big pin pumps? I have plenty of 1.6 IP/engine mount brackets. And one more thing: will the serp belt setup work when you use the mk1 mount bracket?

burn_your_money · « **Reply #2 on:** November 09, 2008, 06:37:00 am »

Check the FAQ for info on the mk1 serp setup. I had to cut a piece off the bracket

I think you can just use a 1.6 bracket with the single piece pulley AAZ pumps

ilikevwdiesel · « **Reply #3 on:** November 09, 2008, 06:51:13 am »

thanks for the info. I wonder if the bracket won't have to be cut on an AAZ where the block is taller?

burn_your_money · « **Reply #4 on:** November 09, 2008, 12:27:24 pm »

It's possible. Mount it up and you'll see right away