-
ID pump head size by part # ?
by
the caveman
on 30 Sep, 2008 07:59
-
I'm working my way backwards trying to find out what size the head was on the 1Y 1.9 na motors. The bosch numbers based on the information i got from vagcat are : 028 130 115 PX and QX , 068 198 015A, 068 130 081 JX and 028 130 107 KX I just want to know if they are 9mm or 10mm
-
#1
by
Turbinepowered
on 30 Sep, 2008 16:35
-
Is it a pump you have in your hands? I don't know VW part numbers, but I can give you the full layout for Bosch part numbers.
-
#2
by
the caveman
on 30 Sep, 2008 20:20
-
No i don't have them in my hands. I was hoping that they be cross referenced. basically i'm trying to determine what size head would have been on a 1Y 1.9 NA.
-
#3
by
blkboostedtruck
on 30 Sep, 2008 21:00
-
i'll take an educated guess? 9mm let me know if i'm right?
this make's my 1000 post lets have a party
Duane :twisted:
-
#4
by
burn_your_money
on 01 Oct, 2008 04:55
-
I have a 028 130 107 Q 1.9 NA pump and it is a 8mm. Hope this helps.
I'm moving this to the IDI section as well
-
#5
by
madmatt
on 01 Oct, 2008 06:28
-
should be 8mm on a 1y
-
#6
by
zukgod1
on 01 Oct, 2008 07:03
-
this make's my 1000 post lets have a party
Duane :twisted:
1000 posts!?
Hooray!!
Wheres the keg?
-
#7
by
the caveman
on 01 Oct, 2008 07:11
-
this make's my 1000 post lets have a party
Duane :twisted:
1000 posts!?
Hooray!!
Wheres the keg?
woo-hoo [chug,chug,chug]
-
#8
by
the caveman
on 01 Oct, 2008 07:15
-
I'm hoping it was 9mm. I just had a 10mm put on and i'm gonna drop into my transporter this friday/saturday. I just hope it gets me to the power level i need so i can then change my R&P from a 5.5 [!] to the 4.86 i got sitting in a box. Thanks everyone, at least its encouraging.
-
#9
by
madmatt
on 01 Oct, 2008 14:59
-
make sure you let the engine breath and dont bother with the small 16na exhaust.If the engine is at 50degs then i use an audi80 gas manifold an a2" exhaust.My old pick would wheel spin in second first was of no use with the5.5 r&p and it was flat out at an indicated 80mph a 5 speed 3h box out of a jx bus ment i could change into top at 70mph