Author Topic: Need a lot of Q's answered please help! (Read 4639 times)

Smokey Eddy · « **on:** September 29, 2008, 11:02:26 pm »

Just yes + modifications or no not a chance please!

Will a TDI ALH intake work with a Garett t3 turbo and 1.9 aaz head in my mk2?

1.9 aaz head with 8mm valves on a 1.6td hydro block? keeping the springs and lifters?

1.6 exhaust mani with the aaz head?

Please help me! I want to order my parts as soon as possible but i don't want to $#@^ up!

Smokey Eddy · « **Reply #1 on:** September 29, 2008, 11:41:52 pm »

I have a complete 1.6TD with a garett t3

My order so far is
1mm over pistons/rings
1.9 aaz head
8mm valves
tdi intake + gasket
egt
cam and valve guides

gigaz2 · « **Reply #2 on:** September 30, 2008, 07:48:33 am »

I think YES to all questions, but someone more knowledgeable will chime in.

make sure the head you're getting is the 8mm one before ordering the valves, there are 7mm aaz heads

Smokey Eddy · « **Reply #3 on:** September 30, 2008, 10:50:58 am »

Yeah I know! That's what's been holding me up and is what is still currently holding me up. He seems to have 8mm intake valves but no 8mm exhaust valves.

does anyone reccomend against reusing valve springs?

RabbitJockey · « **Reply #4 on:** September 30, 2008, 01:41:21 pm »

a tdi intake will work, but if you want to use stock plumbing you'll want an aaz intake with a 1.6td elbow on it, then u only need to grind on the back of the intake a tad to clear the turbo. but if you're going to run an intercooler none of that really matters.

Smokey Eddy · « **Reply #5 on:** September 30, 2008, 02:51:00 pm »

Yes i plan to run an intercooler sorry! i should have mentioned that.
Thanks for your input!!!

Really wishing Pete Rothenbacher would reply to my email now... Or put exhaust valves on his site...

tick tock waiting for exhaust valves.... do do do

Pete Rothenbacher says on his site that a replacement oil return for the turbo on 1.6td's wont work for the 1.9td (or tdi's obviously)
is that because of differences on the 1.9 block or the head? or a combination of both? ie. height of engine
I just want to check with someone who knows

Do i need new liners if im getting my block bored 1mm over stock?

bore and over sized pistons adds $500 that i don't have to the cost of my build. I can hone for less than 100$ and get new rings for my stock pistons. Can i do that? What are the thoughts of the people?
I really need to do this quickly so if you have any thoughts at all i'd love to hear them!

Edit: okay, minus the 1mm over pistons and over boring is SUCH a huge money saver so im not going to do that anymore. Just hone + new rings and hope for the best. Am i stupid for doing that? I really can't afford the big pistons and over bore ontop of the head

Smokey Eddy · « **Reply #6 on:** October 01, 2008, 11:10:43 am »

I really need help building this engine. Please someone help me?
Do i need a cam cover for a 1.9 aaz head or does the 1.6 cross over?
Can i use the same sprocket off my 1.6 head?
Do i need different hard lines?

jtanguay · « **Reply #7 on:** October 01, 2008, 11:32:28 am »

Quote from: "Smokey Eddy"

I really need help building this engine. Please someone help me?
Do i need a cam cover for a 1.9 aaz head or does the 1.6 cross over?
Can i use the same sprocket off my 1.6 head?
Do i need different hard lines?

you need the 1.9 cover & the hard lines. not sure about sprocket though...

Smokey Eddy · « **Reply #8 on:** October 01, 2008, 11:34:46 am »

Ok! thanks!
Prothe only sells 1 cam cover and it claims to fit basically all years. Doesnt give head types or anything just model and year... uhhh?
http://www.dieselvw.com/026103469EValveCover.htm
Also, anyone know where i can find hard lines for an aaz? Im trying very hard to avoid my vw import shop as it's very expensive.

zukgod1 · « **Reply #9 on:** October 01, 2008, 11:54:16 am »

Burn_your_money may be able to get you a set.

Drop him a PM..

zukgod1 · « **Reply #10 on:** October 01, 2008, 12:05:22 pm »

Also I believe the 1.6 valve cover will fit the 1.9 but someone else will have to confirm to be sure.
Again, contact burn

Smokey Eddy · « **Reply #11 on:** October 01, 2008, 12:05:57 pm »

Hmmm okay I guess he'll get two messages now haha.
Perhaps he'll resolve the dispute between jtanguay and zukgod1 about cam cover cross over

Smokey Eddy · « **Reply #12 on:** October 01, 2008, 12:45:33 pm »

Machine new holes you mean? and mofify the gasket accordingly
Sorry, what do you mean by

Quote

The AAZ is mounted by three in the center that attach to cam caps.

I don't follow the cam caps thing... you don't mean the caps that hold the cam down do you?

saurkraut · « **Reply #13 on:** October 01, 2008, 01:00:38 pm »

Stewardc's Caddy with a 1.9TD.

Notice the nerds on the top of the valve cover. The nerds cover the stud&nut that hold the valve cover to the head. The studs are screwed into the caps of cam towers.

Smokey Eddy · « **Reply #14 on:** October 01, 2008, 01:03:24 pm »

Ohhhhhhh I seeee

Uhhh. Couldnt i just fill the holes on the cam and ... not ... use the top studs? I don't have machining tools and i can't pay someone to do it.

absolutely SICK ride btw.
Just thought i'd point that out.